Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Shelf life of 2-Part Epoxy

Posts

Shelf life of 2-Part Epoxy

#1

Shelf life of 2-Part Epoxy

Larry In Lima

>Hello, I have some PSI 2-Part 15 minute epoxy. Been using it for pen tubes and have had it for right at about a year. I have read/heard that it's got a shelf life of about a year. Anyone here using it longer than that and still working well?

Reason I ask is that the hardener part is slowly turning more yellow in color, although it still seems to be setting up well. Will probably order some new with next order, but thought I'd ask about other's experiences. Thanks. Larry

Re: Shelf life of 2-Part Epoxy

#2

Re: Shelf life of 2-Part Epoxy

Norm Smith in Nova Scotia

>Larry, I asked the same question some years ago and was told that the shelf life is more than a few years.

Norm

Re: Shelf life of 2-Part Epoxy

#3

Re: Shelf life of 2-Part Epoxy

Chuck Engstrom

>Hi Larry -- Most of the epoxy I have used has a virtually indefinite shelf life. That is what I have been told by manufacturers I have asked about stuff I've had for 10 years and more, and my experience backs that up. I'm still using a gallon of System Three that was given to me at least fifteen years ago.

Sometimes resin or hardener will get deposits in it, usually from exposure to cold. These can be redissolved by putting the container into a pot of hot water for a while. And the change in color is also common but doesn't seem to have any effect -- my System Three hardener has gotten a good bit darker over the years.

Happy New Year--

Chuck Engstrom

Re: Shelf life of 2-Part Epoxy

#4

Re: Shelf life of 2-Part Epoxy

Larry In Lima

>Thanks guys, I guess I was just getting concerned because of the color change, and don't want to lose blanks to such an "avoidable" mistake. Heck, I goof up enough in other ways!! Happy New Year to you guys too. Larry

Re: Shelf life of 2-Part Epoxy

#5

Yup...

Brian Hahn in SW Wisconsin

>I used some 8 year old System Three epoxy this week. It worked just fine.