We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>My Christmas money is burning a hole in my pocket, I have a Woodcraft gift card, and Woodcraft's "free shipping" lasts only another couple of days. Help!! :-)
I am considering a set of bowl buffs, but am not sure what size to buy. 2", 3" or 4"...what size is most utilitarian?
>I have several different sizes but I use the 4" the most. The 8" that I originally got are the least used for me. The goblet buffs are probably my second most used.
>Personally, I think the 4" are the most useful of the Bowl Buffs because they have the longest cloth fibers, and therefore they are a softer buff.
The problem with the smaller wheels is that they share the same core as the 4" wheel, and the shorter length fibers make the 2" wheel a hard little rescal. For me, the 2" is too hard to be very useful for buffing anything, even small things.
The 3" is an in-between, and like all compromises doesn't do or fit anything very well.
As I said, these are personal opinions that may not be shared by anyone else.
>I have 2" and 3", use the 3" the most, and don't care for the 2" as they are too hard to be of any good use. I plan to acquire some 4" sometime in the future as the 3" are just a bit too small for bowls larger than 6" in diameter. They work, but 4" would be better.
>Joe, I have the three inch and wish I had the four. I do mostly bowls, if I did a lot of goblets and small bowls my choice may be different. I was told the free shipping was over, do you have a link or code for the notice that said it was extended till Dec. 31st?
>The 2" ones are way too hard to be useful - should have saved my money. I use the 4" the most and the 3" only when I have to. The 3" and 2" should be on respectively smaller cores. If Beall won't do it, maybe someone else will eventually.