Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

A few Christmas gifts - first, a bed

Posts

A few Christmas gifts - first, a bed

#1

A few Christmas gifts - first, a bed

David Breth

>my ability is not near what I see posted here regularly, but I thought I'd share. What I lack in ability I make up for with enthusiasm and variety. First at bat is the 4-post bed I made for my daughters' doll. I actually purchased bannister spindles for this, then turned them to the shape I wanted. Two reason - I didn't have sufficient stock to do the posts myself, and secondly, this pretty much guaranteed I would have square pieces to work with. So, the bottom two inches of post is some factory's work. SWMBO picked the fabric, did the sheet and pillow.

I thought my daughter would flip out. Instead, she said "Did you make me a bowl??" No sweetheart. I made a bed for Ella!! Oh. Thanks daddy.

I show her nearly every bowl I make, and even at age 4 has an understanding that daddy's hack bowls are a special thing - and apparently she wanted daddy to share that which she had seen me do for others, for her. So, I did what any dad would do. I took her to my shop, and let her pick out the wood daddy would make a bowl from. One english walnut bowl in process. Ella's bed has since been well-accepted.

By the way, these photos were taken in compromising positions at compromising times, so please excuse the locations, etc.

David B.


img

Re: A few Christmas gifts - first, a bed

#2

Re: A few Christmas gifts - next a fire truck

David Breth

>What every one-and-a-half year old needs. I've made a few toys like this, and always put a coat or two of minwax polyeurethane over the paint to protect it from bangings. Works out pretty well. The black bobbin on the string is a hose. No turning on this one, but wait one more gift and there will be.

David B.


img

Re: A few Christmas gifts - first, a bed

#3

Re: A few Christmas gifts - a spalted maple bowl

David Breth

>I'm pretty sure this is silver maple. Did this for my Sis. My folks took down a maple this past year from the housw where we grew up. Then I left the wood out on the sidewalk next to my garage all summer, almost to the point of losing it from crackingn before I got around to it. This bowl is about five inches in diameter, and I think it is pretty cool.

David B.


img

Re: A few Christmas gifts - first, a bed

#4

Re: A few Christmas gifts - a pilgrim box

David Breth

>For my wife the Mayflower Descendant: a pilgrim box out of Elm.


img

Re: A few Christmas gifts - first, a bed

#5

Re: A few Christmas gifts - and finally, a cane

David Breth

>This cane is ash, from the mountain where my dad grew up in West Virginia. I sweated this one big time. Got lots of help here - Thanks again Mike Cunningham. This was my first cane, and while I had some "wood to spare" for mistakes, I didn't have a lot of room for error. This wood was just barely larger in diamter than the hardware for making the cane. Dad was well-pleased with it, and I was too. You can't see it, but I did leave some bark on the top of the handle. Used Wipe on Minwax Poly. And, by the way, as long as it isn't super-cured, you can fingernail off/cloth off this finish from the lacquered cane top without removing lacquer.

Thanks for looking everybody!

David B.


img

Re: A few Christmas gifts - first, a bed

#6

Re: A few Christmas gifts - first, a bed

Mike Rubes, Apex, NC

>Hi David,

Great stuff, all of it! I really like the silver maple bowl. I love bowls with a story or with wood that has a connection, etc. Glad your little one will get her bowl also! Each of my little guys have "special" pieces that they keep in their room.

Thanks for the pics. The pilgrim box is very clever!

Mike

Hollowing on the noodle in Apex, NC...

Re: A few Christmas gifts - first, a bed

#7

Re: A few Christmas gifts - and finally, a cane

Allen Neighbors

>Cool, David. I like them all. I'm especially fond of the fire truck, since I've been a volunteer firefighter for 18 years. :o)

And you really did a fantastic job on the cane. All truly some nice gifts! :o)

Re: A few Christmas gifts - first, a bed

#8

Re: A few Christmas gifts - first, a bed

Molly Winton

>They're wonderful David. I also like the fire truck. I made a series of trucks for my son when he was about 2-3 years old, similar in size to yours. I made a tanker, cement mixer, dump truck, and flatbed. He's almost 9 now, and the trucks are in a box, but we'll hold on to them for grandkids some day. The pilgrim box is very clever. I like the design. You have a lucky family.

Re: A few Christmas gifts - first, a bed

#9

Good Work.

Barbara Gill, Remlik VA

>They all are very nice. I am interested in the cane hardware; where did you get it?

Re: A few Christmas gifts - first, a bed

#10

Great gifts!

Ed Kelle

>

Re: A few Christmas gifts - first, a bed

#11

Re: A few Christmas gifts - first, a bed

Ron in Drums PA

>Great Gifts David, I'm sure your family loves them.

Why not have your daughter help with the bowl? No reason why she can't apply the finish. IMO that can be an exciting time when the grain pops.

Re: A few Christmas gifts - first, a bed

#12

Re: Good Work.

David Breth

>The hardware came from the Woodturners Catalog (Craft Supplies USA). They had a couple of styles of cane top and bottom. The more pointed bottom looks better in my opinion than the flat one I used, but that one is threaded and I'm not equipped to manage that. They offer different cane tops too, but some of those are threaded, and therefore difficult. At least for me.

David B.

Re: A few Christmas gifts - first, a bed

#13

Thanks

Barbara Gill, Remlik VA

>