Kind of shows we had artsy people
Don Henthorn
>way back then. A real nice piece of history and remember this was before all the modern advancements in turning equipment.
In the early thirties an uncle gave me a line shaft powered set of bench top woodworking machines which included a six inch table saw. a jig saw (now called a scroll saw), a grinding wheel, a drill press and a little lathe. I think about it now and I can't believe the stuff I made with those dinky tools, including a six foot dog eared fence for the back yard.
I got my start turning on that little lathe. We had no chucks and I had never heard of a faceplate. I did have a small drill chuck which screwed onto the spindle. I also had some of the old 1/4" square headed machine bolts. The heads weren't really square but cube shaped. I had a bunch of old thread spools and I could tap a spool onto the head of machine screw held in a the chuck and it held the spool pretty well while I used home made scrapers to make little vases and such. Of course they all had a hole down the middle, but my aunt would take each ones and paint it up and put in on her mantle. She loved them and of course that made me feel good.
My Mom had a set of celuloid handled silverware which she loved. One day they were all in a pot which got too close to a gas flame on the stove and they provided a very lively time around the kitchen as they cheerily burned. This happened around Christmas. After the tree was taken down I took the tree trunk down in my "shop" and found a way to hold the pieces and turned her a new set of handles for the silverware. She used those for years. Needless to say I again felt very good and that hooked me on turning. Everything I knew about turning I learned by trial and error, many errors. This site and others through the years has improved my turning skills immensely, but my enjoyment from turning has always been strong because of those early experiences.