Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Lathe purchase/ Spindle turning

Posts

Lathe purchase/ Spindle turning

#1

Lathe purchase/ Spindle turning

Orion/.Denton, TX

>I'm needing a second hand lathe to turn chair spindels. I am not a turner and don't need to do anything other than turn chair spindles. Any advice on makes or models? Minimum hp I should look for? I want to be able to use a duplicator with it also. I see lathes on ebay all of the time but I'm worried that I wouldn't be happy with one of the cheap import machines or the lightly powered older machines like the dunlop 101.06242. I really don't want or need a large lathe and would like the smallest size lathe that would do a good job.

Any and all advice is appreciated.

Re: Lathe purchase/ Spindle turning

#2

Re: A used Delta or Jet with .....

Jamie Donaldson

>...long bed and 1 HP would do fine if you can find them. Anything larger won't be necessary unless you catch the turning disease!

Re: Lathe purchase/ Spindle turning

#3

Re: A used Delta or Jet with .....

john lucas

>Jamie's dead on. One of the old Delta/Rockwell flatbed lathes would be an excellent choice. They usually come with 1/2 or 3/4 horse. I like at least 3/4 for spindles but 1/2 will do it's just slower. You can get duplicators that fit these. You should be able to get one of these used for $100 to $200.

Re: Lathe purchase/ Spindle turning

#4

Jet mini

Bob Fawcett

>A Jet mini with the bed extension will allow you to turn most spindles. I turned a bedpost on mine before I got my Powermatic. I think you can do about 40" between centers with the extension.

Re: Lathe purchase/ Spindle turning

#5

Re: Jet mini

Don Henthorn

>I agree the Jet mini would be a good choice and for spindle turning the non VS would be fine.