Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Make your own woodworking tools-review

Posts

Make your own woodworking tools-review

#1

Make your own woodworking tools-review

john lucas

>I can't help myself I'm addicted to books. I bought another one while in Atlanta. Make your own woodworking tools by Mike Burton. This is a fabulous book. I've made, and/or repaired a lot of tools in my time so I thought this would be interesting to get a look at how someone else approaches it. I also feel I have enough experience to evaluate his techniques. Let me first say that he obviously has way more experience than I do. That becomes apparent very quickly.

Mike goes through all the reasons why you might want to make your own tools and then explains that he's tried to find the easiest quickest ways for someone with little or no experience to make a tool.

He has obviously gone through the same problems I have and found many of the same solutions. Each chapter is layed out well with great photos. He has a great sense of humor and clearly explains each step.

There is a chapter on making tools without heat. a section on cutting steel and what steel makes good blades.

He covers blacksmithing and includes a very good plan for building your own forge. Wish I had seen this book before starting on my forge. He simplifies it tremendously. He does a very good job of discussing heat treating. He shows how to shape the metal with simple tools found in the shop.

The chapter on making handles is excellent and each chapter has at least a little discussion on making lathe tools.

The section on making your own pneumatic carving tool is worth the price of the book and then some. If you want to try any power carving and have a compressor this is a good book to get you started.

The last 3 or 4 sections actually take you through the steps of making several tools. This is easy to follow with very good photos.

I applaud Mike Burton for a very well done book. I have 3 other tool making books that are pretty good but this book is clearly for the novice and extremely well done.

Re: Make your own woodworking tools-review

#2

Re: Make your own woodworking tools-review

John Pickett - Denton, Tx

>John, could you post the ibn number?

Re: Make your own woodworking tools-review

#3

Re: Make your own woodworking tools-review *LINK*

Darrell Feltmate

>John

Thank you for the great review. Do you have the isbn number or ordering information for the book?


Around the Woods

Re: Make your own woodworking tools-review

#4

Re: Make your own woodworking tools-review

David Galloway

>Thanks John. I'll be there tomorrow to spend some of my gift certicate. I am hoping to attend a blacksmithing course that will address these issues at Campbell. Thanks for the review.

Re: Make your own woodworking tools-review

#5

John, you have saved me...

Clem Wixted, Jonesboro, AR

>...a lot of money over the years because of your recommendations and things I've purchased from you and things that you have given to me.

You have also cost me a ton of money because of your recommendations. :-) My 3520A is the big one.

I just ordered this book, because of your recommendation, from an Amazon vendor for under $11. So, with this purchase, did you help me save money or did you cost me more money? :-)

I might even get to meet you in person in Memphis (it's only 90 miles from here) in February.

Clem

Re: Make your own woodworking tools-review

#6

oops *LINK*

john lucas

>I meant to do that. It's from Fox Chapel Publishing www.foxchapelpublishing.com Isbn 13:978-1-56523-306-5

It's available on Amazon .com for less than I paid.


http://www.amazon.com/Make-Your-Own-Woodworking-Tools/dp/1565233069/sr=11-1/qid=1167180076/ref=sr_11_1/002-6556647-2414408

Re: Make your own woodworking tools-review

#7

Re: John, you have saved me...

john lucas

>Clem Do I get commission on what I've cost you? I cost myself money on this one. I can't wait to get some more metal and get started making some more tools and things. Of course my first tool making project will be some micro tools for an attempt to make even smaller goblets. I got the metal this weekend. It's piano wire.