Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

How I am spending my Chistmas vacation

Posts

How I am spending my Chistmas vacation

#1

How I am spending my Chistmas vacation

John Pickett

>I mentioned the other day that I have recently had an elm tree brought down in my front yard. The tree died inexplicably eary this summer when it started getin really hot and dry. Most of the bark popped of of it in the hot dry weather.

They cut it down Dec. 7 (i guess you could say it was a tree cut in infamy). Anyway I have worked on it some since then but have a chunk of time this weekend to get a good bit cut.

Should I leave some of it long, uncut? should I cut it into blocks, slabs? I have tried to seal the end of some of it with latex, but that didn't take too well. It already has a good may checks and some splits.

I just wanted to post some pics of my good fortune, but suggestions are certainly appreciate. (also have a good bit of Bois dArc out back)


img

Re: How I am spending my Chistmas vacation

#2

Re: How I am spending my Chistmas vacation

Gary in Zirconia, NC

>Your pictures must be small. Under 80k. Under 50 is better. I like to leave my logs as long as I can handle. Anchor seal or simular is better than latex, but latex will work.

Re: How I am spending my Chistmas vacation

#3

Re: How I am spending my Chistmas vacation

John Pickett

>If at first you don't succeed ....


img

Re: How I am spending my Chistmas vacation

#4

Re: How I am spending my Chistmas vacation 

Ron in Drums PA

>


img

Re: How I am spending my Chistmas vacation

#5

Re: How I am spending my Chistmas vacation

John Pickett

>OK, I tried twice from my computer and it said the graphic was too large (even though I resized) I tried from photobucket. I guess I am technologically illiterat. Meanwhile, I'm loosing daylight, so I'll cut some more wood and get back to ya later.

Re: How I am spending my Chistmas vacation

#6

Re: How I am spending my Chistmas vacation

John Pickett

>Hey! How'd you get my picture on your past? I'm sooooo confused.

Re: How I am spending my Chistmas vacation

#7

Re: How I am spending my Chistmas vacation

Ron in Drums PA

>Common problem

You had too many http's

I just clean up the code and posted it for you

Re: How I am spending my Chistmas vacation

#8

Re: How I am spending my Chistmas vacation

John Pickett

>Thanks!

Re: How I am spending my Chistmas vacation

#9

Re: Chistmas vacation - new approach

John Pickett

>I have got a mess of wood out there and no help. Usually woodturners just show up out of the woodwork (pardon the pun) offering to help .... and to take some home.

Anyway, I already have a bad back, and this surely isn't helping. So I'm trying a new approach. I am going to test it out tonight on a few large chunks I have cut.

I brought in some of these large pieces (like the one that I am hoping shows up here). I placed them around the living room. I then went out and rented Nightmare on Elm Street and (for local color) Texas Chainsaw Massacre.

I am hoping that this will scare the pith out of 'em. - Parrrum bump!


img

Re: How I am spending my Chistmas vacation

#10

Re: How I am spending my Chistmas vacation

Gary Evans Tallassee, TN

>Hi John,

Welcome to the group. If you have the time to mess with it right now, I would go ahead and process the wood into usable blanks. Sealing the endgrain will help with degradation, but I've found that the end checks in elm don't usually go very deep, so if you leave your blanks a little long, you should be able to trim off the cracked part when you get ready.

Good luck with your haul. I don't think you'll scare the elm into splitting itself apart, though. A friend of mine tells a story about trying to split some dry elm with dynamite. A quarter stick in the center of a 2' round only made it mad.

Be sure and let some of it spalt. Spalted elm is one of my favorite spalted woods.

Gary

Re: How I am spending my Chistmas vacation

#11

Re: How I am spending my Chistmas vacation *LINK*

Darrell Feltmate

>John

I find elm really stable but I would still get Anchorseal on it as soon as possible. Anything you know you are going to turn should be roughed out as soon as possible as well. As for how I do it, an old tried and true method not original to me, there is info on my site, including a bucking horse to make. Just follow the link.


Around the Woods- Green Wood