Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Yes, you *CAN* sharpen a Sorby SpindleMaster

Posts

Yes, you *CAN* sharpen a Sorby SpindleMaster

#1

Yes, you *CAN* sharpen a Sorby SpindleMaster

Peter Teubel

>The Sorby SpindleMaster is nothing more than a flute-less gouge and thus can be sharpened the same way. Simply put it in the v-arm of the Wolverine jig, match the bevel to the wheel, and grind away. The first time will take a bit longer because you are converting a flat bevel to a hollow ground bevel. Once you've done that, polish the bevel with a motorized felt wheel using your choice of compound (I use the green stuff). Then hone/polish the top using the flat side of the felt wheel. Don't want a hollow grind? Use a belt sander or the side of the Tormek wheel instead of a grinder.

Re: Yes, you *CAN* sharpen a Sorby SpindleMaster

#2

And at times you must...

Clem Wixted, Jonesboro, AR

>...sharpen it.

For example, if "someone" comes into your shop and accidently drops it onto a concrete floor or if "they" hit some sort of metal while turning! :-)

Re: Yes, you *CAN* sharpen a Sorby SpindleMaster

#3

Re: Yes, you *CAN* sharpen a Sorby SpindleMaster

don lewonczyk

>Peter, thanks for the help, you explained it better than I did and now maybe everyone has a clear understanding of the sorby spindlemaster and how to fully care for it. Donl