Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Tormek users

Posts

Tormek users

#1

Tormek users

Greg Haugen

>Hello, I was wondering if those of you that have a Tormek and use it if you could give some feedback to a potential buyer of one.

Curious of your opinions of it.

Thanks

Greg

Re: Tormek users

#2

JL

Re: Tormek users

JL

>I have a Tormek and an 8" grinder. I use the 8" grinder for almost all of my lathe tools. I use the Tormek for honing all of my lathe tools. I use the grinding wheel on the Tormek mostly for my flat tools.

That being said, I can get a superior edge using the Tormek for gouges, scrapers, etc. The 8" grinder is faster though.

Re: Tormek users

#3

Re: Tormek users

Tony - Memphis

>You'll find lots of info on both this forum archive and the messages archive.

I have one and really like it. To qualify, I build furniture. The turning I do is mostly furniture parts. I sharpen everything I have pretty much with the Tormek (chisels, plane irons, carving tools, turning tools, knives, etc. It is an expensive tool, but I am glad I made the investment. I got mine from Sharptools USA. Great customer service and support there. You might also take a look at some of the new look-a-likes. I think there have been some write-ups recently.

Tony

Re: Tormek users

#4

Re: Tormek users

Stuart Johnson

>I have a Tormek but don't use it for my turning tools now that I have a Wolverine system. I still use it for knives but would sell it if it wasn't so good for sharpening scissors.

I would not purchase it just for turning tools.

Re: Tormek users

#5

Re: Tormek users

Bill Stehman

>They give an exception edge but mine just gathers dust now. The wolverine is just quicker and less hassle for me.

Re: Tormek users

#6

Re: Tormek users

Darryl Hansen

>Gregg, I have a grinder and Tormek. I am the knd of guy that cannot get a decent edge on a grinder. The Tomek saved my tools and me piece of mind. If you are going to change the geometry of a turning tool it is much slower than a grinder. Once the shape is to your liking a few swipes on the Tormek brings back a "super" edge every time. Expensive but I would probably have given up in frustration long ago if I had to depend on a grinder for an edge. I'm just a borne clutch...

Re: Tormek users

#7

Steven Antonucci

Have it, love it...

steve antonucci

>Bought it for turning tools, and it is a great tool for sharpening and honing edges of almost any kind. It is not a great tool for grinding, where a grinder will remove lots more materials in 1/10th the time. That being said, I do not own a grinder, and typically grind steel on my belt sander, held in my bench vise.

The Tormek system is very well thought out, and I would highly recommend it to anyone that turns and cares about their finished edges. If you compare the costs of the Tormek + a Wolverine or similar, and factor out that you can't really sharpen a flat blade on a grinder, it's really the best and most versatile system on the market. I tell everyone I know that it's the only tool in my shop that I can't "upgrade".

Steve

Re: Tormek users

#8

Re: Tormek users

Greg Haugen

>Thanks for the input. I have a 8 inch grinder and a wolverine and I'm looking into a Tormek for a few things, skew sharpening more efficient, honing, and for planer knives, etc. I'm a big skew fan and in talking with Nick Cook it would make sharpening my oval skews easier. Better, and a faster sharpened edge on spindle gouges. I have about 5 different skews from 1/4" round to Lacer/Glaser's, to a 2" Sorby Standard Skew. Bowls and vessels are fun but spindles pay for the tools and put some bread on the table more regularly.

Thanks for the input. I think I'm heading to Woodcraft tomorrow.

MERRY CHRISTMAS TO ME, MERRY CHRISTMAS TO ME.

Re: Tormek users

#9

Re: Tormek users

John Lucas

>Greg I sharpen my skews with the plastic paddle diamond hones. Once I've ground the edge with a concave grind on the grinder I switch to the diamond hones and do the rest by hand. It really only takes me about a minute to take one from the grinder to sharp enough to shave hair. If It doesn't need grinding I can hit it with the fine and ultra fine and bring the edge back in about 30 seconds or so. I used to have trouble sharpening a skew but not any more.

Re: Tormek users

#10

Re: Tormek users

Bill Hale / Woodspinner

>Bill

I need a second one. Are you interested in selling it ? If so condition of the grinding wheel, size.

If so how much and what goes with it ?

Thanks Bill in Casa Grande, AZ.

Re: Tormek users

#11

Re: Have it, love it...

TDRice

>I have it and two grinders. I use a grinder to get the general shope on a new tool but the Tormec for almost all my sharpening. Some people say it is too slow and it is slower but sharpening on a grinder will remove hundredths, ore even tenths of an inch. The Tormec can do the same job removing only thousandths.

Re: Tormek users

#12

Re: Have it, love it...

Greg Haugen

>One key item to note here also. I'm asking about sharpening, not reshaping. I really think having both is the best of both worlds.

Thanks for all of the input.

Greg

Re: Tormek users

#13

Re: Tormek users

Dave Wimmer

>I have both Tormek and Wolverine. The Tormek just gathers dust.

Re: Tormek users

#14

Re: Tormek users

Bill Hale / Woodspinner

>I like mine so much I bought Bills. Found out he lives down the road a bit, 150 miles or so. Now I have one for both of my shops.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: Tormek users

#15

Re: Tormek users

eliot d

>I use the Wolverine and the Tormek. I even built the Norm Abrams Tormek cabinet stand, which was a fair amount or work let me tell you, to put it on. There's no question that the Wolverine is much easier and faster, though. But the Tormek certainly saves your tools. So, for some of my expensive and hard -to- replace tools , like my Glazer tools, I use the Tormek. Whatever you do, though, don't try re-shaping an edge on the Tormek; you'll be there forever!

Re: Tormek users

#16

Peter Charles Fagg (UK)

Re: Tormek users

Peter Charles Fagg (UK)

>I have used the cheaper version of the Tormek for the past 6 years and I would recommend it heartily.

Running a business I find it saves me an enormous amount of time between grindings.

Wouldn't be without it now!

Regards, Peter.