Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Woodburning Pens - opinions please.

Posts

Woodburning Pens - opinions please.

#1

Woodburning Pens - opinions please.

Steve Worcester

>I have an excalibur woodburner (Detail Master) and need some pens that are a ball on the end. Custom is not out of the question.

I have tried the Razertip pens (not the HD version) and they tend to be real hot and eventually melt all the plastic at the end.

I am looking for some fixed tip pens (better transfer of heat) that I can use with my existing system.

Any suggestions?

Steve Worcester

www.turningwood.com

Re: Woodburning Pens - opinions please.

#2

Re: Woodburning Pens - opinions please. *LINK*

john lucas

>Steve I'm still learning to use the ball end pens from Optima. I'm really starting to like them. They work really well with very light pressure making a nice clean line. A little too much heat and too much pressure and you get a dotted line. It also makes a very good nice round dot with a little more heat. There definitely is a learning curve but I think these are nice.


http://www.carvertools.com/aboutpjl.htm

Re: Woodburning Pens - opinions please.

#3

Re: Woodburning Pens - opinions please.

Bob Elliott

>Steve,

I'm confused. Razertip does make fixed tip pens with a ball on the end. Was yours a replaceable tip type?

Re: Woodburning Pens - opinions please.

#4

Re: Woodburning Pens - opinions please.

Steve Worcester

>At that link he sells them in heavy duty only. The ones I have are not the heavy duty (they are thinner and vented) and melt at the tip. I use them to make a half circle "crater" if you will.

Steve Worcester

www.turningwood.com

Re: Woodburning Pens - opinions please.

#5

Re: Woodburning Pens - opinions please.

Steve Worcester

>Mine was not a replaceable tip. Although, when the front of the pen melts, I cut them off and use them in a replaceable tip.

Steve Worcester

www.turningwood.com

Re: Woodburning Pens - opinions please.

#6

Re: Woodburning Pens - opinions please.

Steve Worcester

>-Nice guy, called and ordered a few pens today - thanks

Steve Worcester

www.turningwood.com