Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Hammer Handles - Can they...

Posts

Hammer Handles - Can they...

#1

Hammer Handles - Can they...

Clem Wixted, Jonesboro, AR

>...be made on the lathe?

I would like to experiment with making some hammer handles and wonder if I need to do them by hand or can I turn them on the lathe?

I know that hammer handles are not round but with the right offset or off center setup will it work on the lathe?

I've done a search in a number of places and come up with no information.

Can you point me to something?

Thanks,

Clem

Re: Hammer Handles - Can they...

#2

Keith Tompkins

Re: Hammer Handles - Can they...

Keith Tompkins

>Clem, just turn between centers, using three axis points....all on the same plane. You can use three points on both or just one end, depending on the shape you want. YOu may have to experiment a bit, but 1/4" apart is a good starting place.

Re: Hammer Handles - Can they...

#4

Thanks, Keith...

Clem Wixted, Jonesboro, AR

>...I will give it a try.

Seems like it will do the trick.

Clem

Re: Hammer Handles - Can they...

#5

Wow, Peter...

Clem Wixted, Jonesboro, AR

>...there sure are a lot of pages on that site! I looked at many, many pages without any success. I also couldn't find a search feature.

Fred usually has a lot of good information in his publications.

Clem

Re: Hammer Handles - Can they...

#6

Re: Wow, Peter...

Allen Neighbors

>Clem, I went to the link (in the above link) that says, "All articles in MoreWoodturning". Found it: December 2001, Volume 6, Number 11, Turning Hammer Handles....Page 6-11-10.

HTH, Allen

Re: Hammer Handles - Can they...

#7

Thanks, Allen. You're a slueth...

Clem Wixted, Jonesboro, AR

>...for fining it. I obviously went right by it when I went through all of the pages.

I also learned something about PDF's that I should have known before now. When a PDF page opens there is a pair of binoculars in the toolbar that I haven't paid any attention to before. I clicked on the binoculars, typed in "hammer handles" and voila! it went right to the issue that you cited.

Thanks for the info and giving me the opportunity to teach myself something useful.

Clem

Re: Hammer Handles - Can they...

#8

JL

Re: What's wrong with regular hammer handles??

JL

>Maybe I don't have a clue? (Wouldn't be the first time.) My favorite hammer is a fiberglass handled 24 oz framing hammer. Nice soft cushy grip. My next favorite is a very old hickory handled one (16 oz.). Are you trying to turn something like that??

Re: Hammer Handles - Can they...

#9

Re: Thanks, Keith...

tm

>there was a video at the Robert Sorby site demonstrating the Stebcenter turning an oval handle using a dual axis as described by

Keith. I would post the url but I have rice on the stooooooooooove.

Re: Hammer Handles - Can they...

#10

JL, I'm trying ...

Clem Wixted, Jonesboro, AR

>...to make some very short handles for a few hammers.

Also, I have a plethora of hickory and just want to play around with something that isn't perfectly round. Not trying to replace my normal handles.

Clem

Re: Hammer Handles - Can they...

#11

tm, I have the url, thanks.

Clem Wixted, Jonesboro, AR

>

Re: Hammer Handles - Can they...

#12

Re: JL, I'm trying ...

Lan Brady

>Clem,

I may be preaching to the choir. ,but make sure that you split your stock instead of cutting it, before you turn. A hammer needs to have the grain running straight through, from end to end.

Lan

Re: Hammer Handles - Can they...

#13

Lan, I'm not in the choir...

Clem Wixted, Jonesboro, AR

>...but all of my hickory has been split.

I can see the wisdom of splitting and I lucked out on this one.

Thanks,

Clem