Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Raffan's Box turning video

Posts

Raffan's Box turning video

#1

Raffan's Box turning video

Michael Stadulis, in Gloucester County, NJ

>hello,

I'm wopndering what material Raffan uses to finish his boxes, Looks like some he uses dirty paraffin, but what he uses melts too fast. My beeswax never gets hot enough to melt like his does w/o rubbing it with a cloth. Thanks for any tips.

Mike

Re: Raffan's Box turning video

#2

Re: Raffan's Box turning video

John Kyler

>If I remember right, he uses bees wax and then rubs it out with a rag with mineral oil on it. This is one of the finishes I use too.

John

Re: Raffan's Box turning video

#3

Re: Raffan's Box turning video

tm

>I've used beeswax a little and what I find is it melts better at speeds of about 2000 rpm. Are you applying at high enough speeds?

Re: Raffan's Box turning video

#4

Re: Raffan's Box turning video

Michael Stadulis, in Gloucester County, NJ

>I've got it at my highest speed. I get it to melt into a cream then liquid, but I have to apply pressure w/ a rag. I thought that he just toches it and it melted.

Re: Raffan's Box turning video

#5

Re: Raffan's Box turning video

Stuart Johnson

>I'm not sure about what he is using but I've found melted beeswax mixed with mineral oil works well. Melt the beeswax in a double boiler, take off heat and add the mineral oil. Pour into something with a wide enough mouth (little wooden bowl) so you can get at it with a cloth. It will set up so you'll need to play with the ratio until you get something you like. I don't remember off hand but I think I used 1/3 beeswax and 2/3 mineral oil. If you don't like the result just re-melt and add more beeswax if too thin or mineral oil if too thick. Remember to use a double boiler not direct heat.

Re: Raffan's Box turning video

#6

Re: Raffan's Box turning video

tm

>It takes speed & friction to get the heat needed to melt wax.

I just re-watched Raffans dvd right now and even in slow motion his lathe is spinning fast. If you can't get that kind of speed maybe a blend of oil & beeswax as Stuart suggests would be a good solution.

Have a look at Russ's corner over in the menu on the left of your screen, he has lots of excellent finishing tips.

Re: Raffan's Box turning video

#7

Re: Raffan's Box turning video

tm

>Another I should have added is to try pushing a little harder with the rag and hold it against the piece longer to build up heat.

Remember to never wrap your rag around your fingers.

tm

Re: Raffan's Box turning video

#8

Re: Raffan's Box turning video

Michael Stadulis, in Gloucester County, NJ

>That's very interesting. Have you ever tried other drying oils....like non-polymerized tung.....or linseed....or walnut?

Mike

Re: Raffan's Box turning video

#9

Re: Raffan's Box turning video

Fog Tanner

>Like a lot of turners, I used the Raffin finishing method of Beeswax. I have used straight beeswax along with some that I mixed boiled linseed oil and turpintine (beeswax is metled in a double boiler and the other to are added outside). The mixture I use is about like firm butter and softer than pure beeswax.

You just build up a layer and hold the cloth against the piece until the wax starts to melt and then push it along the surface. I use a rag for this and after a while it has enough wax buildup that you really don't need anything more than the rag. For pieces around 2"-2 1/2", I am generally spinning between 1500-2000 (depending on the mood).

In the videos, Raffin uses mineral oil but in the demo and hands on he used boiled linseed oil. I use both, just depends on the wood and look I am after.

Re: Raffan's Box turning video

#10

Re: Raffan's Box turning video

Stuart Johnson

>I haven't but beeswax isn't all that expensive. Give it a try. At worse you'll have to strip it off and try something else.