Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Keyless Drill Chuck recommendations

Posts

Keyless Drill Chuck recommendations

#1

Keyless Drill Chuck recommendations

Michael Stadulis, in Gloucester County, NJ

>I'm looking for a keyless drill chuck and I can't ever remember reading about anyone complaining about a bad one. Any suggestions? I know that you can get one one on the Bay for about $30 , and the finish looks good, but I always wonder if there will be runout and whether I'll be torqued if I get mediocre quality because I didn't spend a few more dollars. Is this an item for which I don't need to pay to dollar?

Thanks for any opinions and recommedations.

Mike

Re: Keyless Drill Chuck recommendations

#2

Re: Keyless Drill Chuck recommendations

Chuck Engstrom

>I bought one recently at Woodcraft for about $35, I think, and it seems plenty good. You'll have to buy the appropriate Morse Taper adapter for it, which is not very expensive as I recall.

Another I have is a Grey Goose brand, 0 - 1/2", plenty nice on a MT2-JT33 adapter. Can't remember where I got that, maybe Packard or MSC. Price on most of the imports is pretty reasonable but it is possible to spend big bucks for a Starrett or such.

The keyless chuck on a 12v Dewalt I bought last summer is pretty pitiful, though. The drill bit almost always ends up spinning, and I may replace it with a keyed chuck.

Best--

Chuck Engstrom

Re: Keyless Drill Chuck recommendations

#3

best wood tools *LINK*

john lucas

>The bestwoodtools keyless chuck is one of the best I've played with. Unfortunately I had already purchased one before I playes with thiers.


http://www.bestwoodtools.com/

Re: Keyless Drill Chuck recommendations

#4

Re: Keyless Drill Chuck recommendations

Jim Pugh, Elyria, OH

>Hi Mike, I bought mine from Enco. They have several variations and the one I have is made by Rohm (I think that is the correct spelling). Price is <$50 and should include the correct MT adaptor. I have been using it now for several years without any complaint.

Re: Keyless Drill Chuck recommendations

#5

Re: Amen, Amen!

Bill Turpin in WNC mountains

>We bought one a year ago. It is the most accurate tool or accesory in the entire shop. It is made like a fine Swiss watch. It is worth every bit of the price. It will hold bits smaller than 1/16", pretty good for a 1/2" chuck.

Bill in WNC mountains

Re: Keyless Drill Chuck recommendations

#6

Re: keyless chucks

Ed Karch

>I bought one for $35 at Louisville and later found a very well machined one of comparable quality for <$15 at JTS machinery.