Black line in sugar maple
DavePowers
>I have received some sugar maple and started turning it. I noticed it has a black line running straight down the side of the piece. Should I remove the line or does it matter?
Knowledge You Can Build On — Est. 1998
Black line in sugar maple
DavePowers
>I have received some sugar maple and started turning it. I noticed it has a black line running straight down the side of the piece. Should I remove the line or does it matter?
Re: Black line in sugar maple
DavePowers
>
Re: Black line in sugar maple
Allen Neighbors
>Dave, those lines look like they run pretty deep; if you turn it away, you may not have much left. You'd have enough for a pepper mill, but maybe not much more. Depends on what you want. To me, they wouldn't detract, but then I think I understand wood more than the average person of the viewing public, and would know it was a characteristic of the wood, or at least know it is built in.
Sorry I can't be more help; Maybe someone with more expertise in design will chime in here.
Re: Black line in sugar maple
DavePowers
>I am not so much concerned with the look. The wood is still wet so I am just roughing it out now. I am very new and just learning how to make different cuts so it would not be for sale or anything like that. I was more concerned with it being a mold or something that could be harmful to myself or son that plays in the garage while I turn.
Re: Black line in sugar maple
Allen Neighbors
>I don't think it's at all harmful, but you might make sure he's out of the place when you sand it. I think it's probably just some spalting.
Re: Black line in sugar maple
Dick Hines
>Almost looks like a crack. If so be very careful if you keep working on it. If it a crack you could soak it with CA. Good luck.
Re: Black line in sugar maple
David Staeheli
>If you are expermenting, why not try some form of decorating that would hide the line. How about ebonizing?
Re: Black line in sugar maple
Dale Stansbery
>Spalting usually follows the grain pattern somewhat. This looks like spalting following stress checks that may have happened when the tree was felled. It may open with drying, or separate when you're turning it.
Inclined to agree with you
Bill Howatt
>
Re: Black line in sugar maple
Bill Hale / Woodspinner
>Dave
If you are going to put your time and effort into a piece of wood, use good wood.
If you use jaw chucks, make a fixture out of this piece. CA the cracks and turn it to what you need.
Good turning and be safe
Bill in Casa Grande, AZ.
Re: Black line in sugar maple
Barry Turner
>If it were me, I'd leave it. I'd really like to hear about how you were planning on removing it though. Might not be so easy.