Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

"Genesis", a Silver Maple Platter

Posts

"Genesis", a Silver Maple Platter

#1

"Genesis", a Silver Maple Platter

Steve Russell

>Hello to the group,

A couple of folks have asked me to post some of my work on WC. This platter is a very provocative example of Silver Maple with excellent color and curl. The piece is named "Genesis" because it represents a rebirth of my artistic endeavors amid the hectic pace of my production studio.

This was a historic Silver Maple that measured about 15 feet in diameter at the ground. I was fortunate enough to obtain a few pieces and I was honored to have the opportunity to work with such a magnificent tree. This platter is approximately 12" in diameter and is 1/4" thick. The floating contoured rim is recessed to fit the pad of your thumb when lifted.

I would be happy to post some of my work from time to time. Through the years I have often struggled with not only getting good quality photographs, but getting them optimized properly for printing and the web. In the past I have tried to post photos here without success (graphics do not like me). If this attempt to post a photo fails, I will be happy to sweep out John Lucas's studio in return for a wee bit of training.

Better Woodturning and Finishing Through Chemistry...

Steve Russell

Eurowood Werks Studio


img

Re: "Genesis", a Silver Maple Platter

#2

Brad Vietje

That "Werks" for me ! Beautiful.

Brad Vietje

>

Re: "Genesis", a Silver Maple Platter

#3

Steven Antonucci

Fine piece of work, for sure...

steve antonucci

>

Re: "Genesis", a Silver Maple Platter

#4

Re: "Genesis" werks for me, too.

Allen Neighbors

>Beautiful... I like the recessed rim idea, too.

Re: "Genesis", a Silver Maple Platter

#5

Re: "Genesis", a Silver Maple Platter

john lucas

>Really nice piece Steven. Nice photo also. Too many people try to get rid of all the glare but if you do that it no longer has any shape, it gets flat. You could reduce it a little by careful placement of lights or the panels. Feel free to write if you have questions. Lord knows I've learned alot from your posts and articles over the years.

Re: "Genesis", a Silver Maple Platter

#6

Re: "Genesis", a Silver Maple Platter

Steve Russell

>Hello John and the group,

Thanks for all of the kind words... John, do you know where I can get some of the light diffusing fabric like on the front of light-boxes? I would like to make up some of my own to fit my light setup and the bulk fabric seems like the easiest way to do this... Thanks in advance and take care.

Better Woodturning and Finishing Through Chemistry...

Steve Russell

Eurowood Werks Studio