Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

New Banjo on a Harbor Freight Lathe

Posts

New Banjo on a Harbor Freight Lathe

#1

New Banjo on a Harbor Freight Lathe

Charlie

>The camshaft on my banjo is really pretty much worthless, it's never worked to lock the thing down well so the thought of replacing it w/ another one from HF seems silly. I've tried to do some on-line research, but there seems to be very little info on the subject. Any help would be appreciated.

Thanks

Charlie

Re: New Banjo on a Harbor Freight Lathe

#2

Re: New Banjo on a Harbor Freight Lathe

Bob Elliott

>Try Packard, they have the Delta banjo for $72.45

http://www.packardwoodworks.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=1146-707&Category_Code=

Re: New Banjo on a Harbor Freight Lathe

#3

Re: New Banjo on a Harbor Freight Lathe

john lucas

>It would probably be easier to repair or modify the existing banjo. Without seeing it I can't make suggestions. Most of the ones I've seen have some sort of adjustment. If the adjustment doesn't have enough movement then building another one or modifying that one would be the way to go.

Do a search on EBAY. I see Banjo's occasionally but finding one that would fit would probably just be luck.

Re: New Banjo on a Harbor Freight Lathe

#4

Re: New Banjo on a Harbor Freight Lathe

Peter Teubel

>Oneway sells their banjos seperatly. Back when I had a Jet 1236, I replaced the stock banjo with one from a 1224. The difference was like night and day. It actually made the lathe a pleaseure to use again. Expensive, yes...but they are a HUGE improvement over any stock banjo and it will be one item you will never have to worry about ever again.

Re: New Banjo on a Harbor Freight Lathe

#5

Re: New Banjo on a Harbor Freight Lathe

Charlie

>Thanks everyone.

I've tried adjusting it, it's pretty worthless overall.

The one-way ones are really expensive, and just doesn't seem to make sense to spend $200 on a banjo for $300 lathe.

So, I'm thinking the delta one, though I was looking at the parts lists from grizzly, do any of you have any experience with the grizzly ones? There aren't any grizzly dealers here, but I've handled the delta ones and they seem pretty sturdy.

Re: New Banjo on a Harbor Freight Lathe

#6

Re: New Banjo on a Harbor Freight Lathe

Allen Neighbors

>I've replaced the banjo on my Grizzly twice. They are made out of cast iron, about 1/2" thick. Mine broke at the side of the toolrest hole. Once I was using the toolrest extension, and once I was on the outer edge of the toolrest. Just couldn't take the pressure. After flat grinding the bottom a little, the banjo locks down okay. They're not too expensive... Banjos (#P5979039) were seven ($7) each and the toolrests (#P5979036) were five ($5) each. (toolrest posts are 15/16" dia)

After breaking the toolrest also, I used JB Weld to stick a 3/4" steel rod across to strengthen the rest. It's never broken. :o)