Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

ornament finial tools

Posts

ornament finial tools

#1

ornament finial tools

john lucas

>These are my favorite tools to turn ornament finials and other small things. The bottom one is a Harbour freight Windsor brand miniature rough out gouge. I got a set of 3 tools for $5. A 1/2" skew, 1/16" parting tool and the 1/2" roughing gouge. The skew and gouge are excellent tools. They hold an edge as good as my Sorby. The parting tool is junk.

The second one is a Sorby miniature roughing gouge. It has the same flute shape as thier bigger continental gouge so I ground the edge similar to what the continental gouge has. This is my go to tool for anything small.

The top one is a homemade skew made from a 3/8" spade bit. I have lots of other skews but this is my favorite.


img

Re: ornament finial tools

#2

Re: ornament finial tools

Lan Brady

>John,

I have bought 2 sets of those 3 piece sets as well. I did not get as good of deal as you did. I resharpened the roughing gouge into a really nice small spindle gouge. Also the parting tool was resharpened into a great captured ring tool and for undercutting finials to seat flush on the globes.

Thanks, Lan