Re: Turning elm: Anything to consider?
Steven Russell
>Hello,
I have turned quite a bit of Elm over the years and in fact, I turned some just yesterday. It grows well in Texas, so it is easy to come by most of the time. Over the years I have turned in excess of 11,500 bowls - of which 500 or so have been from Elm. To date, I have yet to encounter an Elm tree whose wood smelled bad, or offered any difficulties in turning. In this part of Texas we have lots of American Elm and Winged Elm and numerous other Elm variants. Maybe the smelly ones are another species, or they grew near sewer pipes?
I'm not sure of the specific Elm you have, but in general you can expect Elm to turn well. It responds beautifully to shear scraping and cuts clean typically. Advanced cutting techniques like back cutting and shear scraping tame any trouble areas quite well. I have not encountered any sanding difficulties with Elm and in fact for me, it is one of the easier timbers to sand to perfection. Elm is so nice to work with that I use it as one of my "teaching" timbers, for students to learn woodturning techniques.
The large older Elms can have magnificent figure and colour. In addition they offer a visually provocative interlocked herringbone like grain, that is iridescent when moved in the light. You will enjoy working with your Elm I'm sure! Good luck to you and best wishes to you in all of your woodturning endeavors!
Better Woodturning and Finishing Through Chemistry...
Steve Russell
Eurowood Werks Studio