Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Vega PRO duplicators (D-36)??

Posts

Vega PRO duplicators (D-36)??

#1

Vega PRO duplicators (D-36)??

John Kyler

>I'm at a point where I need to turn more than bowls, pens, and boxes.

I have looked at many options and looks like the Vega is the best way to go. I have talked to one person who has used it and he had trouble with finish. We believe that the lathe speed was too slow and the cutter was set too high. I'm looking for responses from people that have used this and what do you think? I will need a 36" for my Woodfast. I have called Vega and they are very friendly I have no doubt that I will have good service after I get one.

I will likely get this from a local source for the same reason, service. The ones selling online at auction are going for about the same as buying new from a dealer.

TIA

John

Re: Vega PRO duplicators (D-36)??

#2

It's a start...

Peter Teubel

>I've used a Vega for several spindle jobs. The finish off the tool ranges from unacceptable to horrible (depending on the wood), and is to be expected. It's just a scraper, after all. If I have to dup something, I first rough out most the waste by hand, setup the dup to make the spindle at least a 1/4" LARGER than called for, and finish up by hand turning everything down to specified dimensions.