Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Me and pens again

Posts

Me and pens again

#1

Me and pens again

David Hammond, in Powder Springs GA

>Ok, still working at this pen stuff. I started a Havanna Rollerball tonight. The drill press I've got is average, and old to say the least. I think it will get me by, but there's some runout in the spindle.

Just for future knowledge, what do I need in a drill press for pens, and what model would you guys recommend?

Thanks,

David

Re: Me and pens again

#2

Your lathe & a drill chuck . NM

dick mcneill

>

Re: Me and pens again

#3

Re: Me and pens again

Jim Shaver Oakville, Ont.

>Hi David,

I now drill on my lathe....Jacobs chuck in the tail stock, a Talon Chuck with spiggot jaws on the head stock...set it at 500 RPM and hit dead centre every time! I have not drilled a pen blank in over 1000 pens now.

Take care,

Jim

Re: Me and pens again

#4

Re: Me and pens again

David Hammond, in Powder Springs GA

>Well, I've drilled on the lathe before too, I just thought you needed a drill press for accuracy, maybe ease... Hmm, well, now I have a centering vise I'm not sure I need. Boy, there's so much to learn!

Thanks for all the help guys, I need it!

David

Re: Me and pens again

#5

Re: Me and pens again

Terry Quiram, Roanoke Illinois

>David

I think the drill press is faster than drilling blanks on the lathe and I use the drill press to assemble my pens.

Terry