Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Spear of Destiny or...

Posts

Spear of Destiny or...

#1

Spear of Destiny or...

Peter Teubel

>...Javelin of the Wood? While starting a spindle job of 6 newel posts, I forgot how dusty kiln dried wood can be. So I dusted off my Vacuum Gouge and hooked it up to my central vac. For roughing, it's great. 360 degrees of HHS edge lasts a long time and all the dust & chips get sucked up. Makes cleanup even faster.

I bought it a few years ago (used) on eBay for $19. It really works and well worth the cost ;)


Re: Spear of Destiny or...

#2

Re: Spear of Destiny or...

Allen Neighbors

>Novel idea... never saw one before. Thanks, Peter.

Re: Spear of Destiny or...

#3

Steven Antonucci

I remember these!

steve antonucci

>I always figured they'd clog if you turned wet wood, but never really thought about dry stuff. Can never have too many tools...

Steve

Re: Spear of Destiny or...

#4

Re: I remember these!

Peter Teubel

>Yes, you are correct. It's useless for wet wood. Instantly clogs.

Re: Spear of Destiny or...

#5

Re: Spear of Destiny or... Dust Hood?

Rick Allen

>I see you have the Oneway Dust Hood.

How does that work for you?

Re: Spear of Destiny or...

#6

Dust Hood

Peter Teubel

>Works so well, that I don't need to wear my Trend Airshield while sanding. I have two 4" hoses going to it (fed from a 6" main line to a 3hp cyclone). It's expensive but one could easily make one to match it's performance. The key is the size and the semi enclosed ends. It creates a huge funnel that draws in the dust.