Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Delta lathe

Posts

Delta lathe

#1

Delta lathe

Mike from Tn.

>Thanks for the replys guys. I've talked myself out of getting a Delta 64-715. I'll save a few more pennies and get the JET. This will be my 3rd lathe and I hope it'll be around for several years longer than the first two. Any turners from around Nashville? I don't turn too bad but I need some hands on help with my sharpening. Any clubs around the area I could turn to? Thanks

Re: Delta lathe

#2

Re: Delta lathe *LINK*

john lucas

>Try the link below. There are about 120+ turners in Nashville. I'm just an hour and 15 minutes away. The tennessee association has hands on classes each month so you could probably get some time in on a Jet 14" to see if you like it. I know there are a lot of different lathes in use by club members so you could probably turn on just about any lathe your interested in.


http://www.tnwoodturners.org/

Re: Delta lathe

#3

Re: Delta lathe  *LINK*

Russ Babbitt

>


AAW Chapters