Anyone use a Lacer skew?
Michael Stadulis, in Gloucester County, NJ
>I am considering them. Do you have both the 5/8 inch and 1 3/8 inch wide skews? Any opinions or observations would be appreciated.
Thanks, and Merry Christmas
Mike
Knowledge You Can Build On — Est. 1998
Anyone use a Lacer skew?
Michael Stadulis, in Gloucester County, NJ
>I am considering them. Do you have both the 5/8 inch and 1 3/8 inch wide skews? Any opinions or observations would be appreciated.
Thanks, and Merry Christmas
Mike
Re: Anyone use a Lacer skew?
Peter Teubel
>I have the Glaser/Lacer 1 3/8" skew. Great tool. I prefer full radius edges on all sides, so I had to grind away on the top part. But once done, it's my go-to tool for large spindle work.
Re: Anyone use a Lacer skew?
John Kyler
>I have both, I prefer the 5/8". Guess it is just a little more managable.
I use the 5/8" and I also have a traditional 3/4" that I have rounded the bottom and top of the tool like the Lacer. It has no radius on the grind.
John
Re: Anyone use a Lacer skew?
Chuck Engstrom
>Hi Michael -- I have the 5/8" Hamlet 2030 Alan Lacer and like it very much for larger work, porch posts and such up to 6" diameter. I suppose I'd like to have the larger one as well but this was a gift and I'm happy to have it. For smaller projects I prefer a tool with a shorter handle and use a 3/4" standard Sorby, lighter and less thick, with the edges rounded off.
Best--
Chuck Engstrom
Re: Anyone use a Lacer skew?
Mark Mandell - Gone Round In Jersey
>Hi, Michael,
I bought the 1-3/8" Lacer-by-Hamlet. I don't do much in the way of spindle work, by I use mine for final shaping of hollow forms with spalted and/or punky wood. The gouge will tear out the grain, but the big heavy skew honed to scalpel status leaves an almost polished surface. I just have to remember to always cut downhill! |;-}}}
Re: Anyone use a Lacer skew?
Cory Oslin
>I use the 5/8" Glaser/Lacer and love it. I haven't used my 1" Hamlet (M2) skew since purchasing my Lacer skew, which was over a year ago.
Re: Anyone use a Lacer skew?
Devon Palmer
>I have both, A11 steel.
I use the 5/8, 80% of the time on stuff that is 2" and smaller. I use the large one on stuff thats 4" or smaller. Any larger than that and there isn't muc clearance for the long point. I love'em, solid as a rock.
My only complaint would be that the steel is a bit thick on the 5/8 somtimes, making it hard to get into a deep/narrow Vee Cut.
- Devo
Re: Anyone use a Lacer skew?
Scott Greaves in Blackfoot Idaho
>Hi Michael,
I use the 1 3/8" Lacer skew. What a nice skew! I like the better Hamlet tools anyway, but the profile on this skew is so nice! I use it mainly for roughing spindles, but it is just as well behaved for much of the detail work as well. I don't use it much to turn pens only because it is hard to fit in that tight of space. I may have to invest in the narrower Lacer skew.
Scott.
Re: Anyone use a Lacer skew?
Greg Jensen
>Might like to look at the P&N skew. Same shape as the Lacer skew and is very affordable. Lee Valley, Craft supply and Packard carry P&N.