Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Demonstration Video Cameras

Posts

Demonstration Video Cameras

#1

Demonstration Video Cameras

Mike-in-Michigan

>Anyone here setup a lathe for video taping demonstrations using the small CCD cameras. I've been doing all the video work for our turning club and we are now starting to record our demos and are going to publish them on a new web site for our group. Anyway I see a camera in AAW mag @ woodchuckers, it's color but fixed focus and no zoom. I am curious what other folks have used. I would love to spend a touch more and go wireless, maybe even w/zoom remote if possible, caching the video with my laptop and outputting to a projection 47" tv in the shop we use for meetings(our high school tax dollars at work). Then I could burn DVD's. I have all the stuff on the laptop for NTSC output and input(if required)... Anyone here do any stuff with this? Can anyone point me to resources?

Re: Demonstration Video Cameras

#2

Re: Demonstration Video Cameras

OB O'Brien

>Hello Mike; The little camera from Woodchuckers is great. Take a closer look at the woodchuckers web site and they show several outlines for its use. The little camera is best mounted above the lathe and adjusted to give the view just like the turner is seeing. Use your regular camera to record the video and audio of the demo like the audience sees it. You can zoom in for closeer shots of whats going on, But remember the human eye doesnt zoom. Route the little cameras video output to your display TV with a splitter to a second camcorder or recorder. Woodchuckers also sells a switcher that you could use to switch between the recordings so you can edit the recordings on your computer after the demo. With a set up like this you don't need to get in the way of the demonstrator. Good luck. OB

Re: Demonstration Video Cameras

#3

Re: Demonstration Video Cameras

John Lucas

>Mike We use 2 of the small cameras and one regular camera with a zoom. One small camera is placed above the lathe to show the turner views. Another one is placed so it looks down the end of the lathe to help show hollowing of bowls and platters etc. The regular camera has a remote zoom so we can shoot the whole instructor or zoom in to get a different detail angle.

Re: Demonstration Video Cameras

#4

Re: Demonstration Video Cameras

Jeff Rich

>I am not sure of the rule on this one... and I am sure Ellis will let me know...I work for a company that installs a variety of professional and security camera systems.

We have several suppliers that we can get from the tiny board cameras up to pro videography studio cameras and equipment. These include Northern Video and TecNec.

I am not an expert on them by any means but there is a lot to choose from.

There is also a lot of processing equipment available as well.