Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Handling work-kinda long

Posts

Handling work-kinda long

#1

Handling work-kinda long

john lucas

>Steven Russell brings up a good point that I don't think we've ever discussed here. Handling other turners work and the public handling your work.

We all know instant galleries are great both locally and at symposiums. Everyone want's to handle the work. We probably should come up with a shared set of guidlines for this. I'll start the list

1st of course- ask the owner if possible. I know if I place something in an instant gallery I expect it to be handled unless I put a sign on it that says, Please don't touch. If it's in a turners home or some other place such as a gallery, ask the owner or leave it alone. I saw some people handle pieces at the AAW symposium that clearly had signs saying do not touch. One of them was the lace piece by Malcolm Zander. If you saw that piece you know how fragile it is. It had a sign saying do not touch. This thing was highly pierced, maybe 1/16" thick and clearly extremely fragile. I would have been nervous to pick it up if Malcolm had handed it to me, why in the world this guy thought he should be allowed to handle it was beyond me.

2nd. When you handle the work there are some guidlines that John Jordan taught us when handling his work at the local club meetings. Don't spin it on the table. This can scratch the bottom. If you must look at all sides, pick it up. If you pick it up try not to handle it any more than necessary. Remember, they may have spent many hours on the finish and really don't want grubby fingerprints all over it. If your hands are dirty, oily, or sweaty it would be best just to look and not touch. If it's reasonably thick put your fingers inside and rotate it with one hand underneath, that leaves the surface untouched.

3rd. Don't tap on the finish with your fingernail to see if it's tough or how thick the piece is. This will easily damage a softer finish.

I haven't done a lot of shows, certainly nothing like Stephen, Russ, Wally etc. I have done enough to know that people need to handle wood. I don't know whether it's something in our genes or what, but if you want to sell wood, get it in thier hands. People will buy some things untouched (probably in high end galleries) but at craft shows you will increase your sales if you can get it in thier hands. That's just been my experience, I look forward to hearing from other.

Even in this situation it would be great if we had more control. Pick up the piece and hand it to the customer. A lot of people handle my work to see how light or how fragile it feels. I hand it too them and say it's tougher than it looks but it can still be brocken if improperlly handled or dropped. They usually handle it quite carefully when I say this.

A booth needs to be a friendly place where people can walk up to each piece and look. It's hard to control traffic in this case so you simply put the fragile pieces up high away from kids or keep them close to the area you stand it. For really fragile pieces I put up a sign that says Fragile, Please ask the artist before handling, Thank you.

Ok give us your recommendations.

Re: Handling work-kinda long

#2

Re: Handling work-kinda long

Gary in Zirconia, NC

>In our instant gallery in our club, we have two colors of tags to fill out, green if you don't care if others pick up your turning and red if it is a do not touch piece. These have Name,species,title,and experience level on them.

Re: Handling work-kinda long

#3

Re: Handling work-kinda long

Wally Dickerman in Arizona

>Yes, people do want to handle turned pieces. To many people, the way a piece feels when it's handled is just as important as how it looks. I've observed people handle a piece and if the curve is right it invites them to caress it. Is it light or is it heavy? This adds to the overall appreciation or possible dislike for the piece. Many want to examine the finish. Unless the piece really attracts someone they won't bother to ask a salesperson to allow them to handle it.

A gallery that has sold my work for many years started displaying some of my more expensive pieces inside glass showcases. After a while I noticed that those pieces weren't selling. I asked them to take them out of the showcase. Then they sold as usual.

Over the years, I haven't had many problems with damaged pieces. But then, I don't do craft shows. Most of my pieces are sold through galleries or sold direct to the customer. My galleries are insured so if a piece is damaged they pay me for it.

Wally

Re: Handling work-kinda long

#4

Keith Tompkins

Re: Handling work-kinda long

Keith Tompkins

>A frustrating topic...I've had other TURNERS tap my pieces with a ring to check (!?!) the hardness of the finish. I've had prize winning pieces damaged...I've often thought it was intentional. I've seen my friend's piece taken out of a plexiglass case, then dropped. A piece worth thousands...destroyed.

One solution is to leave less valuable pieces accessible to the public, so their appetite to handle something can be satisfied; any damaged articles won't cause so much trauma. It may take some changes in booth design, but there should be no way a child can gain access to a valuable piece.

I think if a piece worth thousands of dollars is on public display, it must be out of reach unless YOU personally hand it to someone to examine. Then, if it's dropped you have only yourself to blame. Why not qualify the person's desire to handle a piece..."Are you interested in purchasing that piece?". Perhaps a pedestal too high for smaller hands to reach, or behind a counter, etc. If every effort to avoid damage has been made, and someone still manages to pick up a piece and ruins it, call security or the show management. If nothing else, the stress of the situation may prevent them from touching things in the future.

Re: Handling work-kinda long

#5

I've seen Keith

Charlie Anderson

>blow up a $1000 rose! :-)

Re: Handling work-kinda long

#6

Re: Handling work-kinda long

bob davis

>to me it is very simple...if you dont want your work handled..hide it under the bed...

Re: Handling work-kinda long

#7

Re: Handling work-kinda long

Norm Smith in Nova Scotia

>I encourage customers to pick up my pieces and check them out. However my highest price piece is about $450.00 of which I only take a few to any show.

Norm

Re: Handling work-kinda long

#8

Re: Handling work-kinda long

Jim Swank

>My best pieces are priced in hundreds, not thousands.

I put stuff I'm concerned about toward the back and higher up, out of reach of small hands. Life is too short to spend all my time worried and stressed.

I put smaller, lower priced, and more rugged pieces lower and toward the front and invite children to handle them. Life is too short not to encourage a child's curiousity.

I'm quite willing to ask ill-mannered people - big or little - to leave my booth. I've been known to toss a piece of wood to the guy who stands back, hands in pocket, and tells his wife "I can do that." Life is too short to put up with people like that.

I never handle another persons work unless invited. I figure thir life is too short to spend time worrying about me.

Re: Handling work-kinda long

#9

Keith Tompkins

Re: I've seen Keith

Keith Tompkins

>Me too! I had a bird's-eye view of the whole thing! It was UGLY.

Re: Handling work-kinda long

#10

Re: Handling work-kinda long

Gary Evans Tallassee, TN

>Excellent post, John. Thanks. I also read Steven Russell's post with interest.

I've been thinking about some of these same issues over the past few weeks. At the risk of being accused of making a commercial post, I'll just say that I'm looking at opening a woodturning gallery in the near future.

I also feel that the touching of woodturned products is, for the most part, a necessary factor in a successful sale. Whether it is the visual texture of the wood, the tactile feel of the finish, or the feel and appreciation of the shape, I don't know. I suspect that all three have a part to play in making a turned piece attractive to the buying public.

I hadn't given any thought at all to the idea that it would be necessary to restrict access to the more expensive pieces, particularly if they will be exposed to the general public. We sold a couple of thousand dollars worth of medium to low-priced pieces during the benefit sale that we did for Cole. I was pleased to see such a response. Forunately, we had no problems of inappropriate behavior with the turned pieces.

This certainly gives me some things to think about.

Any other comments or experiences would be appreciated.

Thanks again,

Gary

Re: Handling work-kinda long

#11

I may have meant "Fortunately..."

Gary Evans Tallassee, TN

>

Re: Handling work-kinda long

#12

Re: Handling work-kinda long also

RK in Milwaukee

>My intention here is not to criticize the way others do business but to maybe present some ideas that may or may not be of help.

It seems to me that the big problem is how ordinary people percieve the value of a piece of work. Woodturning is a fairly new art form.

Regardless of the art form, or whatever else you might be selling, the seller or the artist has to create a perception of value in the eye of the public. Look at how many businesses go to great expense to polish their image which creates a perception of value.

If your work is displayed in a way that is overly casual, just sitting on a cloth covered table for instance, you create a perception of value. If your booth is thrown together and your signage is a cheap banner, you create a certain type of image which clues the public into your own self image and they draw on this information to form their perception of the value of your work. Other things such as how you dress, the overall quality of your presentation, the venue you choose to sell in, and the design of your business cards and graphics affect the public's perception of the value of your work. In other words, do you look like Nieman Marcus or do you look like Walmart?

How do you handle your own work in front of the public? If I were selling $3000 pieces, I would put on white cotton gloves and I would have a pair for the person who ASKED to examine the piece. This is a way to show in a direct non-verbal way how much value you the artist put on your work. I used this technique very sucessfully when showing my photographic portfolio.

Too often one exhibits in a certain way because that's the way others do it or that's the way it's always been done. If you want people to value your work you have to find ways to differentiate yourself from everyone else, not follow the pack. It can be a lot of fun to just try something outrageously different just to see if it works.

There is no way I would let someone off if they ruined a piece of work that I valued at $3000. I would see that as being the same as someone taking 3 grand out of my wallet or out of my house. To just shrug something like that off as the cost of doing business says alot about your own perception of the value of your work. Go into Tiffany & Co. and ruin a $3000 necklace and your butt is going to be in jail pronto if you don't pay up.

If you really believe that just anyone (and their bratty kids) should be allowed to pick up your work and feel it, then I think you have to be willing to accept the consequences, without complaint. In retail that is called shrinkage and it does become the cost of doing business.

Thanks to Steve for sharing his experience and to John for keeping the discussion going.

Ron Nelson

Re: Handling work-kinda long

#13

Re: Handling work-kinda long

Donna Banfield

>I do between 15-20 craft shows a year. The highest priced piece I've ever had in my booth was $600 (is sold). I have this sign displayed in my booth:

We love to be touched

Really

Come on, touch me...

You know you want to touch me

(the wood)

It always gets at least a smile, often a laugh. I understand that some pieces are at risk of being damaged, but my philosophy is that I work very hard to get the wood to FEEL as good as it looks, and I want the customer to know that. They won't if I don't let them touch the pieces.

I take care to place certain pieces out of reach of children. For example, I make and sell Wizard Wands (inspired by the Harry Potter craze). I don't have them in reach of young hands, but the kids can certainly see them. I don't think that this deters sales, but it does keep the kids from acting out the latest Harry Potter scene.

I've had some items damaged, and yes, a few beyond repair. But they've been very few, and I also use common sense when chosing which pieces to take to shows. If it's very fragile, it just doesn't go to certain shows.

Re: Handling work-kinda long

#14

Re: Handling work-kinda long also

john lucas

>Interesting insight. I do agree that we are often too casual about our display of work.