Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Also got a light on my lathe. :o)

Posts

Also got a light on my lathe. :o)

#1

Also got a light on my lathe. :o)

Allen Neighbors

>I also recently mounted a light on my lathe. I used an old desk lamp, and made the mounting block from Bois d'Arc, held on by Two 3/8" bolts, just long enough, that screw into two tapped holes. It'll reach bowls turning on either end. Just need one of those 48" draftsman lights, now.


img

Re: Also got a light on my lathe. :o)

#2

Re: Also got a light on my lathe. :o)

Brian McInturff in SC

>I like it. Not to mention the NE you have mounted on there. I need more light in shop. I think I'll steal your idea if you don't mind.

Re: Also got a light on my lathe. :o)

#3

Re: Also got a light on my lathe. :o)

Allen Neighbors

>Go for it, Brian, it's worth the trouble. I made the mounting block long enough to put three mounting holes in it so I can move the light if I need it farther one way or the other.

Hope it works as well for you. :o)

Re: Also got a light on my lathe. :o)

#4

Re: Also got a light on my lathe. :o)

Rick Davenport

>That's a great idea.

Except for one thing.

How could you use such a beatiful piece of Osage Orange/ Bois D'arc for such a mundane purpose?

Let me send you some boring wood, you send me the osage orange and we'll both be happy!

;-)

R

Re: Also got a light on my lathe. :o)

#5

JL

Re: Also got a light on my lathe. :o)

JL

>Looks too neat. You cleaned up before the picture :). Clever idea.

Re: Also got a light on my lathe. :o)

#6

Re: Also got a light on my lathe.

Jeff from MA

>Over the weekend I added lighting to my lathe as well, it makes a big difference. I have two lights similar to the one you show in your photo, but have replaced one of them with a 20W halogen with a sealed head, a flexible goose neck, and most importantly a magnetic base. The base attaches just about anywhere on the lathe there is a flattish spot, the ways, the side of the head-stock, the tail-stock, or even the outboard tool rest.

The magnetic base makes it easy to get light into a workpiece's details or under a rim of a vessel. The lamp head is probably about one quarter the size of the incandescent lamp, so it doesn't get in the way as much. I also feel a little safer with the bulb inside the sealed head, less of a chance of the fragile glass bulb hitting anything that is spinning (or flying). I found my light up on the net doing a search for "machinist task lighting".

More light is definitely better, but it seams to be the cause of a lot of very fine scratches :)

-j