We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I appreciate your insights on this. I finished a cherry platter/bowl after I read John Lucas' posting and things improved dramatically. I still did not get rid of all tear outs but it was reduced to shallow bruising that was removed quickly with moderate grit sandpaper. Do you think use of a curved toolrest (which I don't have)makes it easier to deal with tear-outs?
>A curved tool rest isn't a cure all but it does help. anything that reduces vibration will help. I have one but usually forget to use it. I can swing my straight tool rest around so it almost touches the middle. This leaves the tool unsupported half way between the lip and the middle. A curved tool rest often helps with this area.
>A curved tool rest doesn't help tearout, tecnique, sharp tools, light cuts, and some times wetting the wood with water or oil will help. The curved tool rest does help you make one cut all the was from rim to base at once rather than having to move the tool rest several times to accomplish the same thing and ending up with start/stop marks.