We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>The wood is very heavy and dense and hard. The top view shows the raw wood up against two maple boards. The two smaller pieces are cut from the larger piece. The bottom picture shows the wood in a finished project. It is very nice when finished but I don't have a clue as to what it is!
>I saw a couple downed black palm trees when I was in the Amazon jungle a couple years ago, and the wood looked almost identical in color to that big sample and it was super hard and dense. Palm is also the only wood I know that has those little dots in the grain.
>A clearer close-up photo might help, but I bought a chunk of Red Kabbas that looks pretty similar. If its Palm, there will be very hard strands embedded in a gray, plaster-like matrix. Both are hard to turn smoothly, but the Palm shines up real well if firmed up with CA. The Red Kabbas was pretty disappointing except for the very cool end grain pattern of fibers and holes -- hard to finish nicely.
>Palm is in the same family as grass rather than trees. the wood lacks annular rings. Hard to tell from the pics if the wood in question has rings in addition to the stricking figure. The presence or lack of should help in an ID.
>I don't recall ever seeing leopardwood, so I would not be able to confirm it. In fact, the only reference to leopardwood I have found in my literature is as a synonym for snakewood, which has a different figure from the example posted, unless that is within the natural variability of the wood.
Seems to me, though, that I have also seen another kind of leopardwood, but it didn't have that tapioca pudding look.
I guess the FPL might have to get involved if we want to solve this one.