Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Ship's wheel nutcracker question *LINK*

Posts

Ship's wheel nutcracker question *LINK*

#1

Ship's wheel nutcracker question *LINK*

Ray Johnson

>I have almost finished turning a dish for the Ships Wheel Nutcracker sold by the Craft Supplies (Wood Turners Catalog). The link below shows the nutcracker. My question is that there is a bolt supplied and I am not sure if the nutcracker is supposed to be bolted from the bottom of the dish or what. Any help would be appreciated.


Ship's Wheel Nutcracker

Re: Ship's wheel nutcracker question *LINK*

#2

Re: Ship's wheel nutcracker question

Russ Babbitt

>If no one resonds why not go straight to the source and call or email craft supply.....great place to do business....

Re: Ship's wheel nutcracker question *LINK*

#3

Bolts from the bottom

Harvey Meyer in Atlanta

>I made a few of these several years ago and the nut screws onto the threaded post from the bottom. This means you have to drill thru the center of the bowl and if I recall, the threaded post is kind of short. I seem to remember drilling a larger hole up from the bottom but not all the way thru the bowl - just wide enough for the nut to fit into the larger hole and deep enough to catch the threaded post. I can take a picture (if I can find the bowl)and post here if you need to see what it looks like.

Harvey

Re: Ship's wheel nutcracker question *LINK*

#4

Nutcracker is finished.

Ray Johnson

>Thanks for the responses. I ended up drilling all the way through for the bolt, then countersink from the bottom deep enough so that a socket could be used to tighten the bolt.

The bowl is about 8" wide by 1-1/4" deep. Spalted Maple finished with Crystal Coat and Hut Wood Finish.


img

Re: Ship's wheel nutcracker question *LINK*

#5

Brad Vietje

Beautiful Job -- Nice Piece !

Brad Vietje

>

Re: Ship's wheel nutcracker question *LINK*

#6

Re: Nutcracker is finished.

Mike Rubes, Apex, NC

>Hi Ray,

That's really neat! I would love to know how it really works. That is, does it easily crack nuts? I have a BIL in the Navy and he is a bear to shop for! Something like that be a neat idea and I am sure he doesn't have one :)

Thanks for the pic, I think you did a nice job on the bowl. Good finish as well.

Thanks,

Mike

20F means time to burn scraps tonight in Apex, NC