Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Ash non-finish question

Posts

Ash non-finish question

#1

Ash non-finish question

David Breth

>I'm making a cane for my dad out of ash from the mountain where he grew up in West Virginia. The wood is really white, really pretty, and when sanded to finish, about as smooth to the touch as anything I've ever felt. It actually reminds me a bit of holly.

I'm strongly considering using no finish at all with this, or possibly working in a little paraffin wax. I want to preserve the color and the feel of the wood. The cane will never be used for anything other than looking at. I'm wondering how this will go down over the course of time

By the way, this is the kind of cane where your screw it together. I got the wood in sixteen inch segments, because at the time I had only a mini-lathe. I will tell you right now, it is a major pain in the rear to got those holes drilled so precisely using the lathe (my drill press is waaaayyy too small, and is a cheap eastern asia benchtop unit) and have everything line up just like jazz. This will be the first and very, very, very last collapsable cane I ever do. A pain in the ash for sure. You work with ash, you have to make at least one joke. That is the rule.

I guess that's a long way of saying I would appreciate your input on going the unfinished route.

Thanks -

David B.

Re: Ash non-finish question

#2

Re: Ash non-finish question

Mike Cunningham (Cape May)

>When I've wanted to retain color - not change the color of wood, I've used the 2nd part, the white stick of Hut wax and nothing else, it's worked. Though I suspect over the long haul the wood will darken. You could also try lacquer on a piece of scrap.

As for the holes being centered. Did you use the ferrules from CS? If so, drill the rough blanks on the lathe, insert the ferrules and then turn, your holes will be centered.

Mike

Re: Ash non-finish question

#3

Re: Ash non-finish question

John Lucas

>Try using Krylon Fixatif. It changes the color of wood about as little as anything I've found.

Re: Ash non-finish question

#4

Re: Ash non-finish question

RevDoug

>Water based lacquer will not change the color. If you leave it as raw wood, it will eventually turn grey. Dust will also stick to the raw wood. Just a little finish will allow the dust to slide right off and slow the oxidation process that turns wood grey.

Turn 'em round,

Re: Ash non-finish question

#5

Re: Ash non-finish question

David Breth

>As I think of this, I wonder if the Minwax wipe-on-poly would be a good choice.

David B.

Re: Ash non-finish question

#6

Re: David just beat me to...

Jamie Donaldson

>... the recommendation for a wiping poly finish, but I prefer the Watco version which builds better and has more body than the Minwax. The poly is not as amber as Danish oils, and I have used it on ash as well as maples, hackberry, oaks, etc. with excellent results. It takes a beating and is easy to repair with just a swipe of new finish on a ScotchBrite gray pad, all available at Lowes, etc.

Re: Ash non-finish question

#7

Re: Ash non-finish question

David Breth

>The ferrules are from the Woodturner's Supplies Catalog. Not sure if that is the same thing.

David B.

Re: Ash non-finish question

#8

Re: Ash non-finish question

Mike Cunningham (Cape May)

>Yes the same. I've made several canes using those same ferrules. You should be able to drill the blank on the lathe. Insert the ferrules and with them in place turn to finish, that way your holes are centered. In fact even if you drill off of the lathe, as long as your drilling into the blank before it's turned, turning with the ferrules in place will give you a centered finished product.

Re: Ash non-finish question

#9

Re: Ash non-finish question

David Breth

>How do you brace up the tailstock end of the piece? I think the hollow part of the ferrule is too big to fit over my live center.

David B.

Re: Ash non-finish question

#10

Re: Ash non-finish question

Ed Heuslein

>Howdy David: I've used water based lacquer on ash, holly, etc., with excellent results. It just does turn yellow with time. For an easier to apply finish, consider "Renaissance Wax", which does not yellow with time either (like carnuba and other popular waxes). I have a couple friends who do sculpture work and that's the only finish they will use.

Re: Ash non-finish question

#11

Re: Ash non-finish question *LINK*

Mike Cunningham (Cape May)

>Too big to fit over?> That's the idea it fits over. Read the link for instructions:


Cane how to