Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Neutralizing 2 Part Bleach

Posts

Neutralizing 2 Part Bleach

#1

Neutralizing 2 Part Bleach

Carole Valentine

>Is it absolutely necessary? I have bleached pieces before and not neutralized. They seemed fine, but I wonder if there is any long term negative effect from not doing it? The wood in question is holly.

Re: Neutralizing 2 Part Bleach

#2

George Balock

Re: Neutralizing 2 Part Bleach

George Balock

>Carol,

I'm like you and have not had any problems with not neutralizing. I'm interested in seeing what others have to say.

George

Re: Neutralizing 2 Part Bleach

#3

Re: Neutralizing 2 Part Bleach

Ed Heuslein

>Howdy Carole: I've use this system many times. At first, I neutralized. I no longer do. I see no difference in the final product. The only problem I've thought about is if there is any sanding between the bleaching and the finish, perhaps some of the dust could contain irritants if it gets into the eyes or lungs. I don't sand except afte the first coat, and I've never had any problems.

One last thing. Consider a water based product (I use water based lacquer) for your holly. It won't yellow and the "white white" really stands out.

Ed

Re: Neutralizing 2 Part Bleach

#4

Re: Neutralizing 2 Part Bleach

Carole Valentine

>Thanks Ed. I just found some FAQs printed on the inside of the box and it says you only need to neutralize if you use more than one application. This holly was already very white, but I just thought I would see if it would get any whiter. I don't use any finish on holly. I sand to 12,000 micro-mesh, buff with white diamond and polish with Renaissance wax.