Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

I Need a New Compressor *LINK*

Posts

I Need a New Compressor *LINK*

#1

George Balock

I Need a New Compressor *LINK*

George Balock

>Okay, my PC pancake compressor finally gave up the ghost (one too many hollow forms I guess) and I need to get a new one. So, I'm looking to the hallowed halls of this forum to provide a reccomendation. Cost is an object and it has to run on 110v. I've looked at the Grizzly G4067 and the HF Central Pneumatic 90234-3VGA. What are your reccomendations?

Thanks in advance,

George


Grizzly Compressor

Re: I Need a New Compressor *LINK*

#2

Re: New Compressor

Mark Mandell - Gone Round In Jersey

>In general, oil-lubed will last longer and are a bit quieter; you should, however, equip it with a coalessing filter/regulator that will remove the oil and at least some mositure from the airflow. Next replace the cheezy draincock with a proper ball valve to make it easier to drain condensate from the tank (each day).

Lastly, if you can put the pump in another space where its noise won't bother others (like the garage for a basement shop) and pipe the air into the shop, you'll be a much happier camper/turner.

m

Re: I Need a New Compressor *LINK*

#3

Re: New Compressor

Bill Crommett

>And if you pipe the air to a different location, Don't use PVC !!!

Re: I Need a New Compressor *LINK*

#4

Re: I Need a New Compressor

Ron McKinley

>I looked at compressors in Lowe's yesterday and think you can get more for your money there than the Grizzly. I'm going to have to replace my small Coleman soon...Ron

Re: I Need a New Compressor *LINK*

#5

George Balock

Re: I Need a New Compressor

George Balock

>I looked on ebay and saw DeWalt/Emglo at nearly the same price as the Grizzly. I thinlk that is the direction I'll go.

George