Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

New lathe adventure

Posts

New lathe adventure

#1

New lathe adventure

Don in Northern Arizona

>I took a turning class at Conover Workshops in November and came home lusting for a nice lathe. I have a little Carbatec mini that is OK for turning door/drawer knobs and tool handles, but it lacks a certain gravitas. I wanted my first big lathe to hopefully be my last so I decided on Jet 1642. Dominic Greco's review here on WC had a lot of input into the decision.

There is no Jet dealer that I am aware of in town, so I ordered one from a dealer in Phoenix. I got a call early in the week that it was in. Friday was the soonest I could get down to pick it up. When I arrived they could not find it. I had ordered the 2HP 220 version and all they had was a 1.5HP 110 version that was scheduled to go to a fellow in Prescott. After much scrambling to look for it the salesman and the the store manager determined that they had let the Prescott customer pick up my lathe on Thursday! Steam was beginning to toot out of my ears by now because I had just made the first leg of a 250 mile round trip to pick up the lathe, and I had arranged for some help unloading it and setting it up at home this afternoon.

Long story short, they called the Prescott customer, Jim, and he suggested that they load his lathe in my van and that I come by his house on my way home and that we swap headstocks. A Jet tech assured us that this is the only physical difference between the two lathes and that there were no warranty issues. Jim had not used my lathe yet because the 220 model comes with out an electrical plug. Since driving to Jim's house was about 60 miles out of my way, the dealer offered me $100 in cash for pain, suffering, gas, and lunch money. I took the deal and headed north, swapped headstocks in Prescott and arrived home in time to still get help unloading the lathe.

One good thing that came out of all this is that I met Jim who is a member of the Prescott AAW chapter. There isn't one in Flag, and after chatting with Jim I will probably join his chapter. They meet once a month on Saturday afternoon, so I might be able to make most them.

Hope to get things set up in my new shop so I can start turning regularly by the new year.

Don

Re: New lathe adventure

#2

Re: New lathe adventure

Bob Fawcett

>New lathes seem to have that "adventure" thing quite often.

When I picked up my Powermatic, the fork lift driver at the freight station dropped it into the back of my truck. Fortunately all I got was a small dent in the bed of my truck. The lathe survived the drop test and has performed as well as I could ask ever since.

Re: New lathe adventure

#3

Re: New lathe adventure

Allen Neighbors

>Don, you're a nice guy. I would've lost it. Ya done good!

Post some pics when you get it going. :o)

Re: New lathe adventure

#4

Re: New lathe adventure-backwards

David Staeheli

>I recently got a Vicmark Pro 100, and the first time I turned it on, it was running backwards! The guys at Craftsupplies were very sympathetic, but couldn't help me right away as they had to ask Vicmark for the wiring diagram. Of course, they live in a different time zone (Australia) and there was about a 20 hour wait before the info would come in. I got disgusted and tore it down to get to the motor. There was a wiring diagram under the motor leads cover, switch a couple of legs, and away we went. The best theory is that from "down under", it looks like it was running the right direction!

Re: New lathe adventure

#5

Re: New lathe adventure

Carol from AZ

>Congrats, Don.

You are having way too much fun in retirement! I am going to have to come check out the new shop and new toys. Goodness only knows what else you will have by June!

Re: New lathe adventure

#6

Do visit, Carol

Don in Northern Arizona

>By June I may have things in some semblance of order. I have a LOT of shop furniture to build and a lot of high priority house built-ins that are overdue. Only after I finish quite a bit of flat work can I get serious about turning. I do plan to practice as much as possible, though. Please stop by whenever you can.

Best,

Don

Re: New lathe adventure

#7

Re: New lathe adventure

Don in Northern Arizona

>Bob,

I would really have lost it if they had damaged the van. It was borrowed from a friend.

Don

Re: New lathe adventure

#8

Re: New lathe adventure

Don in Northern Arizona

>Allen,

It helped a lot that Jim was calm and sensible about the debacle. I will post anything not too embarrassing once I develop the courage.

Don

Re: New lathe adventure

#9

Re: New lathe adventure

Lan Brady

>Don,

Great opening paragraph to your wood turning story.

You have a new lathe!

You have a new friend

You got a discount for your troubles.

Possibly a new club of un-met friends

What a wonderful day it actually was!!

I hope you enjoy!, Lan

Re: New lathe adventure

#10

JL

Re: Glad in got "straightened out"...

JL

>Follow the other part of Dominic's articles and build a ballast box. I built it and a drawer unit to nest in the top. I use the drawer unit a lot. Now I have to build one of the many tool racks that have been mentioned on these "pages". I've been using the top of the drawer unit and the swinging "thingy" on mine - sometimes the tools get lost in the shavings!

Re: New lathe adventure

#11

You followed the advice in this axiom:

Clem Wixted, Jonesboro, AR

>When life gives you lemons,

Make lemonade!

Re: New lathe adventure

#12

That's the right way to look at it, Lan and Clem

Don in Northern Arizona

>

Re: New lathe adventure

#13

Re: Glad in got "straightened out"...

Don in Northern Arizona

>JL,

I'd love to see a picture of your drawer unit. It sounds like a great idea. I plan to build a ballast box once I decide on the lathe's final resting place. I also need to raise it about 6 inches to get the spindle to the proper elbow relationship. That seems quite high to me, but it is 2" above my elbow.

Don

Re: New lathe adventure

#14

Alls will that ends well. Murphy is everywhere.

Dave Smith, Longview, WA

>

Re: New lathe adventure

#15

JL

Re: Glad in got "straightened out"...

JL

>This was the first picture of it, pre-shavings and drawer pulls. It looks a lot more dusty now. I modified Dominic's plans for the ballast box and made it "deeper" and closer to the floor. I then built the drawer unit as a separate "box". I ran two pieces of wood lengthwise on the bottom of the drawer unit. They friction fit into the top of the ballast box.


img

Re: New lathe adventure

#16

Re: Glad in got "straightened out"...

Ed Heuslein

>Howdy Don: Something just jumped out at me. You said that 2" above elbow height seemed a little high to you. I would expect so. The standard is to set the center of the spindle at the SAME height as your elbow when standing normally, not bent over. This is a rule of thumb to ensure you are able to turn in a comfortable position. I think 2" above would be a little too close for your tools to be stable when holding them on the tool rest. Anyone else have an opinion on this?

Ed

Re: New lathe adventure

#17

Dick Hines

Re: New lathe adventure

Dick Hines

>Ain't wood turners great people??

Re: New lathe adventure

#18

Thanks, JL

Don in Northern Arizona

>

Re: New lathe adventure

#19

Re: Glad in got "straightened out"...

Don in Northern Arizona

>Ed,

I think what you suggest may work better for me.

Thanks,

Don