Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Pen Turning!

Posts

Pen Turning!

#1

Pen Turning!

David Hammond

>Hey Everybody,

My brother wants me to turn him about 40 pens for a big gathering from a Writing Forum (they're having a big get-together, like WC does sometimes, but they are young writers).

So, I'm looking at buying the equipment to do this. I've got a drill press, I'm going to get a vise for drilling, I'm going to get all the neccesary barrel trimmers and drill bits, but I'm not sure about a few of the other tools.

What about a Pen Mandrel? I'm looking at Craft Supplies, and I like the adjustable mandrel, but I'm wondering if I should get the collet chuck to run the mandrel? Is that a better way to go - more accurate, and more versitile - I could use the collet chuck for other things?

And do I need a Pen Press for the Havanna and Emporer Pen kits? I'm assuming I do. And the nib cap adjuster tool - is this a must?

Thanks for any advice to a very beginner pen turner - I just finished turning a 34" diameter monster Beech bowl, so this is going to be an adjustment!

David

Re: Pen Turning!

#3

Re: Pen Turning!

Cyril Griesbach

>David.

While I have a pen vice, I first used a hand clamp to install the pen parts. However, the vice will give you better and more consistant results. And for 40 pens, well....

Cyril

Re: Pen Turning!

#4

Re: Pen Turning!

Bob Fawcett

>If you decide to spring for a collet chuck, get the Beall. I believe it can handle your pen needs and you also have a great collet chuck you can use for other things.

As far as how to - Russ's site posted above is hard to beat.

Re: Pen Turning!

#5

Re: Pen Turning!

David Hammond

>Hey guys, thanks! I should have remembered Russ's site, that's what I needed. And I may spring for the collet, I kind of like that idea.

What pen mandrel do I buy to go in a collet?

Tia,

David