Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Red Oak Bowl

Posts

Red Oak Bowl

#1

Red Oak Bowl

Cyril Griesbach

>This red oak bowl is 5" dia x 3 1/4" high. This is an initial attempt to add some surface embelishment to a turning and I sure wish I were happier with the results. I don't like oak much anyway so I thought I'd give the color a try on this one. However, when I buffed this piece, some of the (prisma marker) color spread into the open grain near the color band. What could I have done to prevent this other than working with a closer grained wood?

Comments and critiques welcomed.

Cyril


img

Re: Red Oak Bowl

#2

Re: Red Oak Bowl

Mike Rubes, Apex, NC

>Hi Cyril,

That's note a bad looking little bowl. I think the blue makes it look basket like. I wish I could help with the prisma color marker seeping, but I have that same problem with open grained bowls. I have found that if I burn the outline of what I want to color and then color, they done run as much. To help keep the colors off the buffing wheels, I put a layer of Tried and True Varnish on the colored areas (usually the non colored areas as well) and let it dry really well before buffing. I still get color on the wheels, but it seems to leave more color on the piece than otherwise.

Good luck! I like the blue and black, it's a good look.

Thanks,

Mike

Re: Red Oak Bowl

#3

Re: Red Oak Bowl

Cyril Griesbach

>Mike,

Thanks for you kind words. I'll try that varnish trick as I did get some color on the buffs.

Cyril