Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

small shear scrapers *LINK*

Posts

small shear scrapers *LINK*

#1

small shear scrapers *LINK*

joaz

>A while ago i posted info. on the large shear scraper that I use on open bowls. I have had a lot of positive feedback from happy turners. So...I am following that with my experience's with the small scrapers.

This are great for inside goblets and box's. Anything with a round bottom. I use them for the entire inside hollowing and the final scrape.

I have had no catches and end up with a very nice surface on end grain.

Here are a two pics. The large scraper is about 1" wide and the smaller 3/4"

I believe they started out as either shallow gouges or carving tools. I find them at antique tool stores or yard sales.

Of course, the grind is on the oppisite side from normal.

Give um a try and let me know what you think.

More info. on my web site.


img

http://www.maine-web.com/woodturning

Re: small shear scrapers *LINK*

#2

Re: small shear scrapers

Norm Smith in Nova Scotia

>Joaz,

That is very interesting. If you get a chance, I for one would love to see a closeup shot of the cutting edge.

Thanks so much.

Norm

Re: small shear scrapers *LINK*

#3

Re: small shear scrapers

Bill Neddow

>I made one of these about two years ago, based on the information on Joaz' s site. Up until that time, I had a hate relationship with scapers because of the tearout they cause. Just when you think you are making the last finishing pass, a fiber catches and pulls out all the way from China. You have a pinhole in the bowl there is no way to disguise. But with this scraper, I have never had that problem. I think it is a great tool. As a matter of fact, I posted pictures of my version (as exact a copy as I could make of Joaz's tool) at the Woodturner's Resource site, giving Joaz's website address so others could try it.