Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Delta lath noise

Posts

Delta lath noise

#1

Delta lath noise

jack dolan

>My delta 46-700 varible speed bench top seems to be very noisey

in the pully area. Any suggestions on reducing the noise will be

apprecited.

Re: Delta lath noise

#2

Re: Delta lath noise

RP

>It usually means the Reeves pulleys are loose or your belt is trashed. You have to demanufacture the plastic stuff off the headstock to reveal the pulleys. Look around in there and you'll most likely see the marks of where the pulleys used to be or the tailings of your belt that is comming apart. It isn't hard. Just messy.

Re: Delta lath noise

#3

Re: Delta lath noise

jack dolan

>Opened the housing and found out the lower pully was out of line. Made the adjustment and the noise was gone. Many thanks for your input.