Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Now look at what you've done!

Posts

Now look at what you've done!

#1

Steve Kubien

Now look at what you've done!

Steve Kubien

>Hi there,

While I mostly hang out on the quiet, electron-free side, it is only appropriate to post here at this point...

What have you guys done to me?!?!?!?! I was happily planing lumber, using a saw, paring with my chisels and generally enjoying my flat little world. Somehow, a King mini LATHE found its way into my shop along with a few cheap TURNING tools and now, I find myself cutting square blanks just so I can make them round! Eeeek, what's going on? Heck, just this morning a tree service was taking down a nearby ash. Suddenly and completely without warning I'm talking to the guy and 3 logs are on my porch (8-12" diameter and 2.5ft long)! I've got pen blanks and hardware (I completely blame Mr. Shaver for that!) and shavings everywhere.

I do not quite understand all of this but you can expect many newbie questions soon.

Cheers,

Steve Kubien

Re: Now look at what you've done!

#2

JL

Re: Sure, blame the rest of us...

JL

>though it's really sort of hard to twist someone's arm online ;).

Re: Now look at what you've done!

#3

Re: Now look at what you've done!

Barbara Gill, Remlik VA

>Steve, I think that is really great. Welcome to turning.

Re: Now look at what you've done!

#4

Bob Moffett

Re: Now look at what you've done!

Bob Moffett

>Welcome, I'm glad we lured you away from the Flat Side. The force will be strong in this one.

Re: Now look at what you've done!

#5

Re: Now look at what you've done!

Cyril Griesbach

>Another one bites the dust!!

Welcome, Steve.

Cyril

Re: Now look at what you've done!

#6

Re: Now look at what you've done!

Bill Howatt

>And you don't have to waste any time trying to get things square!

billh

Re: Now look at what you've done!

#7

Re: Now look at what you've done!

Bob Fawcett

>Steve,

All my handplanes and the shooting board are now looked at as tools to make segmented turning blanks.

Hope your having fun.

Re: Now look at what you've done!

#8

Re: Now look at what you've done!

Sean Troy

>Maybe we should start a 12 step program for turners !! :)

Re: Now look at what you've done!

#9

Re: Now look at what you've done!

Ed Karch

>Is that 12 steps in or 12 steps out?

Re: Now look at what you've done!

#10

Re: Now look at what you've done!

Chip in Plano

>Segmented turning....Now that's a topic of insanity worthy of a 12 step program. Cut a nice straight flat piece of wood into small pieces then glue them back together again....over and over.

Step 1 Admitted we were powerless over turning and our lives have become unmanageable. Step 2...

I'm hoping to make my segmenting tablesaw sled this weekend.... I wonder if Malcom Tibbets would be my sponsor. I have his Step-by-Step book... :D

Re: Now look at what you've done!

#11

Steve Kubien

Thanks for the support

Steve Kubien

>I roughed out a bowl from some of that green ash. I've only got a faceplate and drive spur so it won't be as deep as I would like. (Note to self... Be good and maybe Santa will bring a 4-jaw chuck). I made my first pen today out of bocote. Sorry, no pictures because SWMBO has the camera. Besides, it will be under the tree for her and I don't know how to use the darn thing. Yup, I think I may have swallowed the hook.

Cheers,

Steve Kubien