Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

anoying noice on a pm3520b

Posts

anoying noice on a pm3520b

#1

anoying noice on a pm3520b

miguel

>I have recentlly bougth an incredible lathe, a pm3520b, really the best bang for the buck, about a month ago I noticed an anoying noice in every revolution specially in the low rpm, I know there is a tread about this and they all have an intresting and long ways to fixit,someone even called the pm technitian (for me it is out of the question I live in monterrey mexico)and I just solved the problem and so simple and fast that I want to share with all this fine and intresting people called woodturners. the problem is in the block that holds the spindle when you push the black buton to hold tight the spindle just take of the buton removing the screws and plate and troughout the hole find the block opresors and with an allen key tighten them (they are two one oposed to the other)and the noice stops.have a nice thanks given day

from monterrey mexico

Re: anoying noice on a pm3520b

#2

Good tip.

Don Henthorn

>

Re: anoying noice on a pm3520b

#3

Bienvenido!

Jorge Castaneda

>Miguel,

Thanks for the tip, hope you become a regular contributor to this fine forum.

Let us see some of your work.

Thanks

Jorge

Re: anoying noice on a pm3520b

#4

Andy DiPietro

Re: Thank You, Thank You

Andy DiPietro

>That was exactly the noise problem on my 3520B. Not only was one set screw loose but the second one fell out and I found it between the housing and two of cables. No more low rpm Noise!!

Re: anoying noice on a pm3520b

#5

Re: anoying noice on a pm3520b

john lucas

>Good tip. You should submit it to the AAW messageboards. They have a Powermatic tips section. http://www.woodturner.org/vbforum/index.php?

It's under the tips and techniques section.

Re: anoying noice on a pm3520b

#6

Re: anoying noice on a pm3520b

eliot d

>Does anyone know if this is also a problem with the Powermatic 2530 A ( the A, not the B) ?

Re: anoying noice on a pm3520b

#7

Dick Hines

Re: anoying noice on a pm3520b

Dick Hines

>I have had the same trouble. I cut the long end of an Allen wrench off and use a big set of pliers to tighten the screws. Then I dropped a little AC on the screws.

Re: anoying noice on a pm3520b

#9

Re: anoying noice on a pm3520b

georgetroy

>You could also post this information on the Powermatic group on MSN.

http://groups.msn.com/PowermaticLatheOwners

Re: anoying noice on a pm3520b

#10

Re: anoying noice on a pm3520b

Jerry Whitaker

>Miguel....When are you heading back north across the border? When you do, come back and see me. I still live in the same place.