Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

remote dust collector control

Posts

remote dust collector control

#1

remote dust collector control

joaz

>This thing is amazing. My jet collecter is upstairs in my shop. My Powermatic is on the same 220 circuit so every time I turned the lathe on the jet came on. I would have to then go outside, up the back stairs(usually in the snow or 20 below) to turn it off or on. Now i hang the control on the side of the lathe and push the button when I need it. Fabulous!!!

Made by Woodcraft. No affiliation, but one happy customer.

Re: remote dust collector control

#2

Re: remote dust collector control

John Lucas

>I bought one from Penn state and wouldn't be without it. I got my dad one 2 years ago for his shopsmith dust collector and he loves it as well.

Re: remote dust collector control

#3

Re: remote dust collector control

Peter Teubel

>Yes, it works great. I bought a half dozen extra remotes and mounted them to each piece of machinery that's attached to my DC system. So no matter what machine I am at, there a DC swich right there.

Re: remote dust collector control

#4

Re: remote dust collector control

Bob Fawcett

>Being the frugal Scotsman I built one out of 2 outdoor electrical boxes, a cheap extension cord, and an outlet and a switch. My DC runs on 110. I cut the plug end off the extension cord leaving about 2' attached to the plug. I wired one box with the outlet, and the other with the switch. The outlet box is attached to the plug. Now I have a remote switch with a 23' cord I can carry to whatever machine I am working on. These days thats usually my lathe, so it sits on the end of teh bed.

Re: remote dust collector control

#5

a voice of dissent

MFoster

>I had a similar setup but found that the remote was always getting lost (I don't live in an immaculate shop). I found that I spent a lot of time searching for the damn thing and started getting frustrated by it. I came across an article on a build it yourself automatic switch in Woodwork (Feb 2005 "Automating your dust collector" the issue also has a nice article on Michelle Holzapfel). This requires doing some minor electronics, but it is spelled out really well in the article on how to build it and where to get the components. I'm relatively clueless regarding electronics, but had no problem getting mine up and running.

I have my dust collector in the basement under my shop with multiple machines connected to it. The nice part of this system is that all I do is turn on the machine and the dust collector starts up at the same time, the collector then shuts off when I turn the machine off, no searching for a remote. I still have to remember to open and close gates though. I also was able to wire a couple of wall mounted switches (one by the lathe and one at a downdraft table) that will turn the collector on and off. This allows me to run the collector at the lathe when I choose instead of all the time the lathe is on.

The system takes time (but not a lot of $$) to put together, but I find that the results are far superior to the remote. One benefit for me is that with the remote, I would often not bother to search for it (or walk across the shop to where I put it down), so would use a dust producing machine without the benefit of collecting the dust. The new system is far healthier for me, especially as I have asthama, and I really need to think about protecting my lungs.

So, anyone interested in a cheap wireless remote system for a 220V dust collector??

Re: remote dust collector control

#6

Re: a voice of dissent

eliot d

>Yes, I'm interested in your 220 volt remote. Please email me at eliot@mathtechinc.com.