Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

gavel design

Posts

gavel design

#1

gavel design

eliot d

>A received a " commission " to turn a ladies' gavel. I put it in quotes because my payment was some of the Wye oak that the gavel was to be turned from.( Marylanders will know about the 450 year old Wye oak tree that came down a while ago.) When I delivered the gavel, my client, a lovely DAR lady who was giving it to the DAR , didn't seem to happy. When I asked what was wrong, she said that she thought the gavel's head was on the small side. I don't have a picture, but the head was 3 inches long and 1 1/4 inches in diameter; and the handle was about 8 1/2 inches long. I thought the proportions were just right --to my eye ,at least. Are there any general rules about the proportions of a gavel?

Re: gavel design

#2

Re: gavel design

john lucas

>Elliot. I've only made 2 and the roughly resemble this one which was made by my friend Bobby Clemons. rough dimensions are 2" wide 3" long on the head and handle is about 9".

I made my heads slightly longer but about 2" in diameter. When I served on jury duty the judges gavel was very large. Maybe 3" in diameter and 6" long with a big handle. I guess size matters.


img

Re: gavel design

#3

Re: gavel design

Rod Peterson -- Ormond Beach

>Those probably aren't too bad dimensions for a presentation gavel, however, I prefer something quite a bit more substantial as a true instrument of order. After watching the House of Representatives sessions for many years on C-SPAN, I determined the approximate dimension of the gavel they use and reproduced one for my own (I was president of a local SIG club at the time—later used it effectively when I was president of the condo association where we lived). I am very happy with the result.



The principal dimensions are:
  • 11 3⁄8" overall length of handle (not including head)

  • 1 3⁄8" major diameter at thickest part of handle

  • 2½" diameter of head

  • 5" overall length of head.

It's made of maple. There's nothing particular about the material, but maple has a nice density for giving it a good size to weight ratio. It has a very satisfying heft, both in weight and balance, and fills the hand perfectly for me. I never made a striking plate, but I never had any difficulty maintaining order with it (a gavel, much like leadership, shouldn't have to be employed loudly—one establishes order by being fair, impartial, and consistent, in my opinion).

Rod

Re: gavel design

#4

Re: gavel design

Jennifer@Indy.USA

>Eliot,

Betty Scarpino wrote an article in a previous Woodworker's Journal magazine issue. Probably from 2005. If you look in their back issues you will find it. It talked about the dimensions, how to's and finishes.

Jennifer

Re: gavel design

#5

Re: gavel design

Bill Grumbine (Kutztown PA)

>Eliot, I have not turned lots of gavels, but here is one I did for the Lafayette College Student Council or whatever it is called. This was probably close to 10 years ago, but I think that the head is about 2"+ in diameter and close to 5" long. The box and the gavel were made from the same wood.


You might want to do a search on Larry Hancock. He is an extremely talented turner who has made many hundreds of gavels for all sorts of people, important and self important. Larry is also a great guy and very helpful, although it has been a long time since I have seen a posting by him.

Bill

Re: gavel design

#6

Re: gavel design

Fred Bearman

>From what I have seen, that is a fairly typical size for a lady's gavel.

Re: gavel design

#7

Re: gavel design

eliot d

>I feel better. Most of the others had me convinced that mine was on the slim side, But you're good to remind me that my instructions were to make it a ladies gavel for the DAR.

Re: gavel design

#8

Re: gavel design

Bill Luinetti

>Here's an image of my "prototype" gavel, from the design in a tutorial at http://turnedtreasures.com/project.html/gavel_turning/gavel.html.

The head is ~2.5"d x 4"l, and the handle, proud of the head, is 8.5" long. The material is pear branch.

The referenced tutorial is excellent.


img

Re: gavel design

#9

Re: gavel design

Bill Luinetti

>I inadvertently posted my image in response to John Lucas' post, where I just intended it to be addressed to the original message.

The other point about the gavel construct that I did not mention in the previous post, is that the handle end is threaded as is the recess in the head (with the Beall 1/2" wood tap & die).

Bill


img

Re: gavel design

#10

Larry Handcock has a good tutorial  *LINK*

Dave Smith, Longview, WA

>


Making a Gavel