Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Faceplates for spindle with oddball thread?

Posts

Faceplates for spindle with oddball thread?

#1

Faceplates for spindle with oddball thread?

wilbur

>I'm looking to get my first lathe, and I'm going to see a vintage lathe this weekend. The threading on the spindle on this lathe is 1" x 12 tpi. The lathe will come with some chucks and faceplates, but I'm looking into the event that I might have to replace or get a new chuck/faceplate. I know that chucks are available for this threading, but I haven't been able to find a source for faceplates that would fit this spindle. I've looked on the Packard, Craft USA, and Woodcraft websites so far.

How would I go about getting a new faceplate for this threading?

Re: Faceplates for spindle with oddball thread?

#2

Re: Faceplates for spindle with oddball thread?

Jason Clark

>Grizzly has a 6" cast iron faceplate with a 1X12 thread.

http://www.grizzly.com/products/H3414

Jason

Re: Faceplates for spindle with oddball thread?

#3

Brian McKearney

Re: Faceplates for spindle with oddball thread? *LINK*

Brian McKearney

>According to their website, Oneway has custom thread sizes available for $19.95 plus the price of the faceplate.

Brian


Oneway

Re: Faceplates for spindle with oddball thread?

#4

Re: donpencil.com or leevalley.com

L G - WI

>

Re: Faceplates for spindle with oddball thread?

#5

Re: I have several choices for you.

Al Crandall (N.E. of Indy)

>In addition to buying a ready made faceplate, you can make your own threaded glue blocks from wood. A tap for your size spindle can be bought inexpensively at:

http://www.jtsmach.com/jtswebshop/Taps_Dies/T004.asp

I bought some factory second aluminum faceplates one size smaller than my lathe and bored them out on the lathe. After re-tapping them, they are a perfect fit on my lathe.

If you weld or have a friend who does, you can weld a nut to a steel plate and make your own. I have done this several times. Nuts for your spindle can be found at http://www.mcmaster.com/. Search for item number 90490A250.

Re: Faceplates for spindle with oddball thread?

#6

Re: Faceplates for spindle with oddball thread?

Verne

>Most chucks require adapter/inserts to mount the chuck to the lathe spindle. They come in a variety of thread configurations to mount to various lathe spindles. Nova chucks, for example, have various inserts including one for lathes with 1"x 12 tpi spindles.

Re: Faceplates for spindle with oddball thread?

#8

Re: Faceplates for spindle with oddball thread?

Darryl Hansen

>check Bill Kuhlemeier at seahorsecustfab@aol.com or 706-334-4057 also used to be accesible at mebers.aol.com/seahorsecustfab I received his name from David Ellsworth..Darryl

Re: Faceplates for spindle with oddball thread?

#9

Re: Faceplates for spindle with oddball thread?

Bob Fawcett

>Why not buy a spindle adapter for a popular thread?

You should be able to get a 1 x 8 or a 1-1/4 x 8 and then use any number of things made for these standard sizes.

Re: Faceplates for spindle with oddball thread?

#10

Al, I have made a number of wood

Don Henthorn

>nut chucks and they seem to work just fine but I got to wondering. If I had a larger project than I normally turn would it be better to make the nut thick enough to snug against the collar. I haven't been doing this for the smaller projects I do, but just wanted to be sure. What do you think?

Re: Faceplates for spindle with oddball thread?

#11

Re: Resounding YES.

Al Crandall (N.E. of Indy)

>The most secure fastening is accomplished by having the attachment securely tightened against the collar of the spindle. My lathe has an unthreaded portion of the spindle next to the collar. I always have to relieve or cut away about 1/4" of threads inside the end of the attachment threads so that it will snug up tight against the collar. It's not too big a deal if the threads are in wood, but if the attachment uses a steel nut, the nut must be spun on backwards first so that the threads can be bored out prior to completing the project. I use a thick steel washer between the nut and the collar for this operation and install an adjustable boring head in the tailstock to bore the threads out.

Re: Faceplates for spindle with oddball thread?

#12

Re: I have several choices for you.

wilbur

>Hi Al,

How durable are those faceplates that are made with a nut welded to a steel plate? I saw a picture of one on the wbnoble website, and I'm worried about the weld failing while turning a larger piece of wood.

Re: Faceplates for spindle with oddball thread?

#13

Re: I have several choices for you.

john lucas

>Wilbur Depends on your welding skill I would think. That being said I suck as a welder but mine are all still solid. I made six of them a bunch of years ago. I have since converted them all to permanent vacuum chucks so I don't use them as faceplates for hollowing anymore.

I've also made several for friends and haven't had any complaints that I know of.

Re: Faceplates for spindle with oddball thread?

#14

Re: Weak point is screw to wood junction.

Al Crandall (N.E. of Indy)

>The screws will break or they will strip out of the wood before the welds break. Weld failure would be the farthest thing from my mind, but like John mentioned it depends on your skill at welding.

Re: Faceplates for spindle with oddball thread?

#15

Re: I have several choices for you.

Stuart Johnson

>I have several that I bought from W. Noble. They are all very well welded but to be honest I rarely use them for anything other than fixed discs that can be flattened.

The nuts are not deep enough to fit my Nova 3K properly without at least 2 nylon washers. If I was to re-spend the money I would spend it on a 1-1/4 x 8 tap and make my own for glue blocks. I doubt if these would be strong enough for large out of balance pieces. For those I use a 3" One Way faceplate. Don Pencil also sells some very nice faceplates and many times has them discounted on his blemish page. My only dislike is when I screw on my aluminum tailstock chuck adaptor I have to be careful to leave it loose or it will stick and be next to impossible to remove. This has something to do with aluminum being having scales sort of like fish scales that lock together.

Re: Faceplates for spindle with oddball thread?

#16

Re: Faceplates for spindle with oddball thread?

Bill Hale / Woodspinner

>I keep asking, WHY USE A FACEPLATE AT ALL ?

I turn many many bowls and platters a year and have not used a faceplate for years.

Bill in Casa Grande, AZ.

Re: Faceplates for spindle with oddball thread?

#17

Re: Faceplates for spindle with oddball thread?

Brian Myers

>Checkout Grizzly they use 1x12 on a number of their lathes.

6" faceplates http://www.grizzly.com/products/H3414

Scroll chuck http://www.grizzly.com/products/H6266

Scroll chuck http://www.grizzly.com/products/G8785

Re: Faceplates for spindle with oddball thread?

#18

I guess I was pretty sure

Don Henthorn

>what your answer would be because it makes sense. I don't know why that didn't occur to me when I was making the nuts, probably because I didn't have anything thick enough in the scrap bin and it was easier not to think about it.(G)

Re: Faceplates for spindle with oddball thread?

#19

I guess it is what you are used to, l.

Don Henthorn

>Bill. I started turning 70 years ago and there were no scroll chucks. I now own a chuck but I still prefer to turn with a faceplate over the chuck. I like to be able to turn the wooden glue block attached to the faceplate down as small as I want so that I can do what I want at the bottom of the turning. Just not as limiting for me. Of course I am old fashioned about a lot of things and don't intend to change for what I consider the worse.(G)