Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

NEW CHUCK RECOMMENDATIONS?

Posts

NEW CHUCK RECOMMENDATIONS?

#1

NEW CHUCK RECOMMENDATIONS?

Greg Deavers

>The boss just said I may get a new chuck for my Christmas Pressie....

Normally, I'm a flat work hobbiest - have acquired an old 12" Craftsman lathe. Nothing fancy, but am yearning to learn to turn. If my skills work out I will upgrade to a nicer lathe . (I want to use this chuck system on the new one as well.)

Could anyone suggest a 3-4 jaw (expandable) chucking SYSTEM??? I really need the biggest BANG for my $$$ starting out.

Research shows all seem to be in the "ballpark" pricing of each other. I know what to expect, and don't have to buy everything all at once, but I need to GET STARTED for Christmas items, etc!!!!

Are there any "DEALS" to be had on chucks?

Thanks very much in advance!

Sincerely,

Greg Deavers

Re: NEW CHUCK RECOMMENDATIONS?

#2

Re: NEW CHUCK RECOMMENDATIONS?

Sean Troy

>My choice would be the Vicmarc VM100

Re: NEW CHUCK RECOMMENDATIONS?

#3

Re: NEW CHUCK RECOMMENDATIONS? *LINK*

Gary Ratajczak

>I second the Vicmarc VM100. I know there are some knock off's, but the action on the Vic is much smoother. Also, have not confirmed, but some have mentioned the steel is better on the Vic.

Best to spend a few extra $$ on the chuck, and just buy one.

Also - depends a lot on what you actually want to do with it. Penn State, Craft Supplies and Grizzley all have import models that many people in the group own ($99.00 to $150.00). All seem to be happy from what I have read.


http://www.woodturnerscatalog.com/cgi-bin/shopper?preadd=action&key=991-0400

Re: NEW CHUCK RECOMMENDATIONS?

#4

Re: NEW CHUCK RECOMMENDATIONS?

gil jones

>I have the VM100, and it is a fine chuck! I also have the Grizzly copy of it, and while the scroll action is not as smooth as the VM100, it works fine (and is half the cost), AND the jaws interchange on both. [http://www.grizzly.com/products/searchresults.aspx?q=wood+chuck&submit.x=0&submit.y=0 see top row from left]

Gil

Re: NEW CHUCK RECOMMENDATIONS?

#6

Re: NEW CHUCK RECOMMENDATIONS?

Ed Moore

>If I could only have one chuck for a small lathe it would be the Vicmarc VM100.

Ed

Re: NEW CHUCK RECOMMENDATIONS?

#7

Re: NEW CHUCK RECOMMENDATIONS?

bob davis

>the grizzly would fit yourneeds

Re: NEW CHUCK RECOMMENDATIONS?

#8

Re: NEW CHUCK RECOMMENDATIONS?

Jason Clark

>Take a look at the Barracuda2 chuck from Penn State Industries,

http://www.pennstateind.com/store/csc3000c.html

http://www.pennstateind.com/catalog/00063.htm

Chuck, 4 sets of jaws, 2 threaded inserts, woodworm screw - $169.99

Jason

Re: NEW CHUCK RECOMMENDATIONS?

#9

Re: I forgot to make the LINK to Grizzly

John Lucas

>I have the same as Gil. I like my vicmarc chucks better but they are almost twice as expensive. I'm starting to roung out the holes in the Grizzly adaptor so it hasn't been hardened or the same quality of steel as the Vicmarc. My suggestion is to get the vicmarc if you can. It will last a lifetime. If not the Grizzly is a decent chuck.

Re: NEW CHUCK RECOMMENDATIONS?

#10

Ordered!! Thanks very much for your support!!

Greg Deavers in Stillwater

>I just ordered the Vicmarc 3 1/2" Chuck and a couple of other jaws.

I sincerely appreciate your commentary and assistance in this venture.

Great Woodworking to you all!

Greg Deavers