Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Finish for wine goblet?

Posts

Finish for wine goblet?

#1

Finish for wine goblet?

ChuckS

>I'm sitting here drinking my evening wine. It's handmade wine & it should be enjoyed from a handmade container, not some commercial junk like I'm using. I'm sure this has been posted before, but I'm not finding anything when I search.

I have some maple & cherry that should work nicely.

Do I need a finish? What finish?

Thanks!

ChuckS

Re: Finish for wine goblet?

#2

Re: Finish for wine goblet?

Ralph

>Almost any hardening finish will do for any wood. But for oak, maple or cherry and wine, no finish should work also. Recall that casks were made of all these woods, before oak was settled on for wine (and it's effect on wine taste).

Now, when I am making goblets, and I know the drinker will be drinking other, stronger, acidic, etc drinks I use a two part finish, usually a quick wash of Envirotex

Re: Finish for wine goblet?

#3

Re: Finish for wine goblet?

Phil Joines Krum, Tx

>I sold some to a wine shop. They wanted them in White Oak without finish on the inside.

There are no finishes that will hold up to leaving alcohol on them for extended periods.

Re: Finish for wine goblet?

#4

Re: Finish for wine goblet?

gil jones

>I can understand how you feel about a handcrafted goblet, but after all is said and done, I still prefer crystal, glass, or ceramic for drinking anything. Just my 7� worth.

Gil

Re: Finish for wine goblet?

#5

Re: Finish for wine goblet?

tek-Brunswick, Ohio

>Just make sure you use White Oak! Red Oak will leak like a sieve. The White Oak has filled pores the Red Oak has hollow pores. (like straws)

Re: Finish for wine goblet?

#6

Re: Finish for wine goblet?

john lucas

>That's why I cut the stem off of a glass goblet and put a wooden base on. It avoids all the questions about staining, finish peeling off, etc. I haven't tried to sell these but the people I've given them to really love them, ( or at least can keep a really straight face when they tell me).

Re: Finish for wine goblet?

#7

Re: Finish for wine goblet?

Ralph

>Might I suggest you look at products like Envirotex. Two part finishes will still be there when the wood rots away.

Re: Finish for wine goblet?

#8

Thanks everybody!

ChuckS

>I'll go for no finish. If/when I get tired of a little extra wood character in my wine, I'll make some with a glass bowl.

Good reminder on red vs white oak! I will make one from red to give to guests after they have "had a few".

Re: Finish for wine goblet?

#9

Re: Finish for wine goblet?

gil jones

>John,

Do yo scuff up the glass base when you glue it to wood, and what adhesive works best for you?

Gil

Re: Finish for wine goblet?

#10

Dick Hines

Re: Finish for wine goblet?

Dick Hines

>A friend of mine uses AC glue.

Re: Finish for wine goblet?

#11

Re: Finish for wine goblet?

John Lucas

>Gil I leave a short stem and glue to this. I don't scuff it although I have scored some horizontal lines with a dremel cutoff tool just in case the glue didn't hold. I use clear silicone caulking and try not to put so much on that it clouds the bottom of the glass.

Re: Finish for wine goblet?

#12

Re: Finish for wine goblet?

Russ Fairfield

>If you like wood, leave it as wood. Bare wood was as a perfectly acceptable surface for wine goblets for several thousand years before modern science gave us finishes to cover it up. It still is. Just don't use wood with holes in it.

Re: Finish for wine goblet?

#13

Wood is (generally) a food safe surface

Ralph

>Exactly (at least for many woods)

Re: Finish for wine goblet?

#14

Re: If you don't add a finish, be sure .....

Jamie Donaldson

>... to dip the wood goblet in water before pouring in the wine. I had a set of wooden goblets that always drank the first pouring, and the first time it disappeared I accused my wife of drinking my wine! But at least they didn't shatter from bouncing around in our RV!

Re: Finish for wine goblet?

#15

Thanks John...

gil jones

>