Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Molly Winton...

Posts

Molly Winton...

#1

Molly Winton...

Jorge Castaneda

>Hi Molly,

After the Ellijay gathering last spring,rmember the chunk of cherry with some burl that could not fit in your suitcase and you gave it to me?

By the time I made it back to Maine it was all cracked and life got very busy, now and then I took a hard look at that chunk, but it was not talking to me. A couple days ago it was a deluge around here, I picked that chunk once again and instantly saw a shape in there.

Here it is, it got smaller than needed to get rid of cracks, but I am pleased with the shape, it has one coat of Waterlox, still wet. It was roughed and shaped in the outside with my new flame, my 5/8 P&N detail gauge.

Thank you!

Jorge

taking advantage of bad weather in Stonington to catch up with my turning


img

Re: Molly Winton...

#2

Re: Molly Winton...

Hooligan

>I likes it a lot! I wish I had access to cherry around here, alas, it seems everything goes to the "smokers". Almost never get it, so when I see a nice piece like that it makes me a little jealous.

The P&N gouge: You dig it? I just ordered the 5/16" detail, because I can't get my Glaser 7/16", at least it seems it can't be found, and I am on the last thread of flute with it.

I've heard very good things about the P&N gouges, though, and look forward to getting it in my paws. Most likely, I will end up getting the 1/2" as well... I'm such a tool hound.

Re: Molly Winton...

#3

Brad Vietje

Hooligan...

Brad Vietje

>Hey Hoolgan,

Contact me off-list if you want to trade some Black Cherry for whatever you have wherever you live. I don't easily part with Cherry Burls, but a half-round log section or a bowl blank is entirely do-able -- heck, the stuff grows on trees around here !

Safe spinning,

Brad Vietje

Newbury, VT

Re: Molly Winton...

#4

Re: Hooligan...

Hooligan

>Thank you sir. I will do that in the future!

Re: Molly Winton...

#5

Detail gauge

Jorge Castaneda

>Hooligan,

yes I like it a lot, it has a learning curve, think of it as a round skew, it behaves the same way, nasty catches when presented wrong and very smooth cuts whe done right; and yes, the smaller one comes real handy too, they can get into tight places. Go for it.

Jorge

Re: Molly Winton...

#6

Re: Detail gauge

Hooligan

>Yessir, I know what you mean. I've got several, and find them to be indispensable for bowls, boxes, and well, pretty much everything. I have heard much about the P&N tools, though, and thought I'd give them a try.

Glad you like it, as far as an unbiased standpoint, it is a good thing to hear.

Re: Molly Winton...

#7

Re: Molly Winton...

Molly Winton

>Jorge, this is a beautiful form. The cherry is gorgeous too. I'm glad you were able to make something out of it. Funny how you can stare at a piece of wood and see nothing until one day BOOM, there it is. I'm glad you waited to see what it showed you. You did it justice.

Re: Molly Winton...

#8

Re: Molly Winton...

Jorge Castaneda

>Molly

I am glad you saw what came out of it.

Thanks

orge