We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Yesterday I got my Don Pencil Scorpion Hollowing system. A DVD on how to use the thing would be nice but there isnt one. Does anyone know of a DVD on a system similar to the Scorpion? I understand that the Jordan hollower is similar but I am not sure.
>hello: I have the same question. Is the David Ellsworth video on hollowing a good one? I am sure that it would demonstrate the use of the tools that he sells but may be of value. I am comtmplating buying the Don Pencil setup too. THanks Jared
>Highly recommend the Ellsworth tapes (DVDS) on hollowing. I've been successfully using his tools for about 14 years now. Simple tools but no armbrace. I'm sure the Jordan hollowing video is great also. I have some of his tools also. I'd recommend them all. Good luck on your new adventure.
>The Scorpion hollower by Don Pencil is more like the Dennis Stewart system (later ripped off by Sorby) than other hand-held systems. I am not aware of a DVD/Video on these particular hollowing systems, but I think the video tape by John Jordan (Hollow Turning with John Jordan) is the best out there. I think there is a lot to be gained in the Ellsworth tapes, but he uses his straight shank tools with straight-ahead and angled bits, whereas John Jordan's video shows curved swan-neck tools in use and has MUCH better photography of the tools in action, cutting techniques, and even cutting direction (end- vs side-grain, and I think will be the most helpful.
John calls his curved neck hollowing tools "hook" tools, in which I think he is mistaken, as that's just too confusing with real hook tools (like those by Andre Martel or Mitch Wolok, or home-made) that have a hook-shaped, bevel-supported cutting tip, as opposed to his 3/16" round nose scrapers mounted in a curved boring bar. These are excellent tools, and a pleasure to use, but I'd call them swan-neck hollowing tools, or something like that. That's the only place where I think video isn't perfect. His calm, laid back unexcited style and careful presentation makes hollow form turning easy to understand and fun to learn. If you can't borrow the tape from a local turning club, go ahead and buy it -- you won't be sorry! After you watch it a number of times, you can donate it to your local club's video library so others can check it out.
If there are newer hollow form tapes or DVD's on the market that I should learn about, especially those that show swan neck tools and the Armbrace in use, I hope someone will enlighten me.
>"The Scorpion hollower by Don Pencil is more like the Dennis Stewart system (later ripped off by Sorby)"
Hi Brad
It was always my understanding that Dennis Stewart licenced the tool to Sorby to make a version with the Sorby name on it. Do you have any details on this?
>Brad, I find myself agreeing with just about every word you say -- in all your posts. It's a pleasure to read your posts -- not just because we seem to think alike.Thanks!
I think I may have gone a little too far for a public forum (lack of sleep/judgement, feisty mood, etc...) I'll contact you directly with this one. I just hate to get calls from lawyers, but I 'spose solicitors with British accents would be a shade better...