Hollowing tool I use...
Blake Washburn
>You'll see this towards the bottom of the page as well. Handle is 22" long and the wrench is 1 1/4" wide.
Blake Washburn
Knowledge You Can Build On — Est. 1998
Hollowing tool I use...
Blake Washburn
>You'll see this towards the bottom of the page as well. Handle is 22" long and the wrench is 1 1/4" wide.
Blake Washburn
Another Pic...
Blake Washburn
>
Re: Another Pic...
Blake Washburn
>
That is a nice tool, Blake.
Don Henthorn
>It is serving you well judging by the work which you posted. You might want to try to make a swan neck cutting tool as well to help fight the torque caused by the off center action of the allen wrench. You can find examples of swan necked tools by searching the archives. However I don't want to rush you as you are doing pretty well with what you have. Keep it up my turner friend.
Re: Another Pic...
Allen Neighbors
>Pretty cool, Blake!
Re: Hollowing tool I use...
Ruth Niles
>Thanks, Blake, that's exactly what I wanted to see. It does look like it would do a nice job hollowing. I made my own hollowing system and I love it, probably because I made it myself (well, I did have a wee bit of technical advice from a machinist friend).
Thanks Blake
Barbara Gill, Remlik VA
>Nice tool.
Re: Hollowing tool I use...
Richard Jones
>Man, I haven't seen one of those sticks in a long time..............
Rich (I'm an ASP man, myself....) in VA