Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Turned Wood Engine

Posts

Turned Wood Engine

#1

Turned Wood Engine

Bill Kay

>Hi,

I turned this 5 cylinder engine to enter it in the "Segmented Turning" contest and never got around to submitting it. It is about 2 feet in diameter.

Each cylinder is made from 11 pieces, The prop spinner is 35 pieces. Engine case is around 40 pieces and a few more for the intake and exhaust stacks. The prop is carved from a 7 lamination blank.

The engine is modular. There is a 3/8 threaded rod attached to the mount. Each of the sub-assemblies slide onto the shaft and the prop spinner is the nut that holds it all together.

I had to make a few fixtures to make sure the mounting points for the cylinders and push rods were aligned properly.

Thw woods used are Maple, Cherry, Alder, Walnut, Oak and Poplar.

Thanks for taking a look.

SeYa .... Bill


img

Re: Turned Wood Engine

#2

Re: Turned Wood Engine

Bill Kay

>Photo Of the engine case and one cylinder assembly.


img

Re: Turned Wood Engine

#3

JL

Re: Absolutely very cool!!

JL

>Now you have to do the rest of the plane :).

Re: Turned Wood Engine

#4

Keith Tompkins

Re: Turned Wood Engine

Keith Tompkins

>Thanks for posting this Bill. Very cool...how about a challenge? Make one cylinder with a cutout, such as in an engineering model? You could then view the piston and connecting rod! Neat piece.

Re: Turned Wood Engine

#5

Ric Taylor

This Pilot Thinks That is Great!

Ric Taylor

>

Re: Turned Wood Engine

#6

Re: Turned Wood Engine

Ron in Drums PA

>This is wonderful, thanks for sharing that with us.

Re: Turned Wood Engine

#7

Re: Turned Wood Engine

Mkauder, Phenix City, AL

>As one of the judges of the segmented turning contest, I will tell you that it is very unfortunate that you did not get this piece entered. Outstanding work, both from a technical and conceptual point of view.

Mark

Re: Turned Wood Engine

#8

Re: Turned Wood Engine

Bill Stehman

>Bill, this is creativity at it's best. Well done and thanks for sharing.

Re: Turned Wood Engine

#9

Re: Turned Wood Engine

eliot d

>It's just fantastic! Wow! I wonder how well it would have done in the contest. I have a feeling that most of the judges would go for the more conventional segmented stuff.

Re: Turned Wood Engine

#10

But Will it FLY? : )

Ruth Niles

>That is so creative, interesting and well done.

Re: Turned Wood Engine

#11

Re: This pilot is very impressed!

Wayne Leach-NW Ontario

>

Re: Turned Wood Engine

#12

Re: This old ex-pilot says it's AWESOME!

Allen Neighbors

>Makes me wish I'd flown a Cessna 180 one day when I had a chance!!

Well thought out and executed! BTW, do I see a compression leak in that one cylinder?? :o)

Re: Turned Wood Engine

#13

Turned Wood Engine

Bill Kay

>Hi Keith,

Already made the crank and Master Rod Assembly. A guy was over to take a look and liked it so much that I gave it to him.

The cylinders have a bore diameter of 1.75 inches. Might need to make up 5 or so Champion Plugs and a carb or master control.

Now, if I can find a little 115/145 around here we'll see if it can turn that prop.

SeYa .... Bill

Re: Turned Wood Engine

#14

Re: But Will it FLY? : )

Bill Kay

>Hi Ruth,

I have had more than one project of mine that flew across the shop. Not sure why.

Here is a photo of one that flies very well. The wing span is a little under 10 feet.

SeYa .... Bill


img