Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Beer Cooler

Posts

Beer Cooler

#1

Beer Cooler

Jim King

>Covered Beer Cooler

This is made of about 86 pieces of kiln dried � and � inch thick glued up scrap boards. The wood is Red Dalmatian , much harder than Blood wood. The size is 56 inches tall and the largest dia. is the covered bowl being 16 � �. The base inside out turning is 24� tall x 8� at the widest point. The final, another inside out turning is 3 � inches in dia. X 12 � tall. The finish is floor polyurethane and in a couple of weeks will be buffed to a high shine. 7 days of work as with our car spring tools it was necessary to sharpen each every 5 minutes due to the hardness of the wood.


img

Re: Beer Cooler

#2

Re: Beer Cooler Photo II 

Jim King

>


img

Re: Beer Cooler

#3

Wow that's really Cool, literally

john lucas

>

Re: Beer Cooler

#4

JL

Re: Basin in that? Or are you just leaving it to.

JL

>the polyurethane?? Really nice piece. Your work could adorn some high priced restaurants quite nicely. Hmmm... how about a champagne bucket?? With stand of course!

Re: Beer Cooler

#5

Re: Basin in that? Or are you just leaving it to.

Jim King

>JL: The polyurethane when built up to 40 or 50 coats seams to be waterproof but if I make another one for someone else I would probably find a glass or plastic liner. On your idea I am gluing up a wine cooler on an insideout stand out of pink wood. It should be different.

Re: Beer Cooler

#6

Re: Beer Cooler

eaglesc

>In this case, function follows form!

Beautiful!!!!!!!!!!

I see wooden bird baths

Baptismal fonts

That is definately "thinking outside the BOWL"