Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

high speed steel

Posts

high speed steel

#1

high speed steel

Jeff Rich

>Does anyone have a source for high speed steel for tools?

Re: high speed steel

#2

Re: high speed steel *LINK*

john lucas

>Jeff I use old planer blades or I buy from Enco. I suppose there are a ton of places if you just do some searches. Be aware that you can't heat treat HSS yourself unless you have a pretty sophisticated heat treating oven.


http://www.use-enco.com

Re: high speed steel

#3

Re: high speed steel  *LINK*

Ron in Drums PA

>


MCS

Re: high speed steel

#4

Check your

Terry Quiram, Roanoke Illinois

>phone book for someone that does industrial grinding. They may have some worn out, too small to use blades that will make excellent turning tools and scrapers. I did this and got some great stuff.

Re: high speed steel

#5

Re: high speed steel

Jeff Rich

>Thanks for the leads!

I am also going to try some local steel houses.

I will let everyone know if I find a good deal.